VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB650 — Pistons et segments

Check the bore measurements before ordering rings for your 1982 CB650. The standard-size set covers one piston, while the pin and retaining clips are separate choices. A motorcycle that has already been rebored needs the fitted piston size verified first.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pistons et segments

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

$1.95 USD
05-7201
Secure your piston pins with this 2-pack of 15mm Piston Pin Clips, Japanese made to superior quality and replacing OEM Ref. #94601-15000. Exceptionally broad...
Honda CB750 CB650 CB550 tappet adjuster screw and nut set 90012-426-000

Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000

$4.61 USD
49-0784
Replace your tappet adjuster screws and nuts with this Tappet Adjuster Screw & Nut Set. Each set includes one tappet adjuster screw and one...
Honda CB650 CB650C CB650SC piston ring set (standard size) 13011-426-004

1979-82 Honda CB650 / CB650C / CB650SC Piston Ring Set (Standard Size) ~ Replaces 13011-426-004

$34.95 USD
73-1024
Rebuild your CB650 cylinders with this Standard-Size Piston Ring Set, OEM #13011-426-004 (Std.). Japanese-made, superior quality.Note: this set includes piston rings to rebuild one...
Nouveau
Honda CB650 CB550 CB500 piston pin 13111-440-000

Honda CB Genuine Honda Piston Pin ~ OEM 13111-440-000 / 13111-286-000

$18.95 USD
99-5321
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Piston Pin — precision‑engineered and made in Japan. This authentic replacement fits and...
Comparer

1982 Honda CB650 · Piston Rings & Pins Buying guide

Build the order one piston at a time

Standard rings and piston-pin hardware are separate replacement parts. Base the order on inspected piston condition and measured cylinders rather than assuming every four-cylinder rebuild requires the same replacement pieces.

Parts to consider

1979-82 Honda CB650 / CB650C / CB650SC Piston Ring Set (Standard Size) ~ Replaces 13011-426-004 Standard piston ringsJapanese-made rings for one standard-size piston. Four sets cover all four pistons.Voir la pièce Honda CB Genuine Honda Piston Pin ~ OEM 13111-440-000 / 13111-286-000 Genuine Honda piston pinHonda piston pin with references 13111-440-000 and 13111-286-000.Voir la pièce

Pièces connexes : 15mm piston-pin clip pair

Separate supplied quantity from engine quantity

One standard ring set rebuilds one piston; four sets are specified when all four pistons are being ringed. The retaining clips come in packs of two. Keep those different package units visible on the order rather than multiplying every item by the same number.

Inspect before choosing hardware

The genuine Honda pin is sold individually: four pins replace all four. The separate pack contains two 15mm clips, enough for one compatible piston; four packs supply eight clips for all four pistons. Match the piston and pin-retaining arrangement before ordering, especially with aftermarket pistons. Rings, pins and clips are separate products.

Buying questions

What measurements determine whether standard rings are suitable?

Measure bore diameter, taper and out-of-round, then verify the piston markings and ring grooves. Check ring end gap in the cylinder and side clearance in the piston groove against Honda specifications during assembly. Once standard size is confirmed, one set covers one piston and four sets cover all four.

How are the retaining clips packaged?

Two 15mm clips are supplied per pack, enough for one compatible piston. Four packs provide eight clips for all four pistons; a smaller repair needs one pack for each compatible piston being serviced.

What should be checked before deciding to replace a piston pin?

Measure the clearance between the pin and piston bore, and inspect the connecting-rod small end for scoring or looseness. Match the piston and pin diameter to the listed Honda application, and include new specified retaining clips if the old clips are removed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB650

Votre panier

×