Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Leviers de frein et d’embrayage, câbles d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Black Clutch Lever ~ Replaces 53178-461-000

$9.95 USD
08-0115
Replace your DOHC CB's black clutch lever with this Clutch Lever, a direct replacement for OEM #53178-461-000. Fits the 1979-82 DOHC CB750 lineup plus...

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90113-422-000

$7.00 USD
73-0998
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt (8mm) & Nut Set, used to fasten the clutch lever in...
Épuisé
Honda CB750 CB900 CB1100 CB650 black hand lever 53175-MA5-671

Honda CB Black Hand Lever ~ Replaces 53175-MA5-671

$9.95 USD
08-0085
Choose a blacked-out alternative to the chrome 07-9995 brake lever with this Black Brake Lever. Replaces OEM #53175-MA5-671 / #53175-MA6-016 with the same broad...

Honda CB1000 / CB900 / CB750 / CB650 Handlebar Rubber Boot ~ Replaces 53180-425-010

$15.95 USD
73-0095
Replace your handlebar rubber boot with this Handlebar Rubber Boot, replacing OEM #53180-425-010.Key Features• Handlebar rubber boot• Replaces OEM #53180-425-010• Honda part name: Boot,...

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Épuisé
Honda CB1100 CB1000 handlebar brake lever pivot bolt and nut set 90114-MA5-671

Honda CB Handlebar Brake Lever Pivot Bolt & Nut Set ~ Replaces 90114-MA5-671

$9.95 USD
73-1031
Replace your brake lever pivot hardware with this Handlebar Brake Lever Pivot Bolt & Nut Set, used to fasten the brake lever in place....
Nouveau
Honda CB1000 CB900 CB750 CB650 clutch adjuster bolt 22841-425-000

Honda CB1000 / CB900 / CB750 / CB650 Clutch Adjuster Bolt ~ Replaces 22841-425-000

$8.35 USD
29-7033
Replace your clutch adjuster bolt with this Clutch Adjuster Bolt, replacing OEM #22841-425-000.Key Features• Clutch adjuster bolt• Replaces OEM #22841-425-000• Honda part name: Bolt,...

Honda CB Chrome Brake Lever ~ Replaces 53175-MA5-671

$18.95 USD
07-9995
Run a chrome brake lever on your later-model CB with this Chrome Brake Lever, a direct replacement for OEM #53175-MA5-671 / #53175-MA6-016. Fits a...

1981 Honda CB650 · Brake & Clutch Levers Buying guide

Match the lever to its actual mounting assembly

Black brake and clutch levers are distinct replacements. The separate brake pivot set supplies one bolt and nut; a changed master cylinder can require a different lever despite the motorcycle year.

Finish comes after fit

The black and linked chrome brake levers share the documented replacement references. Compare the fitted lever and cylinder before choosing either finish. If the motorcycle has an aftermarket cylinder, use the lever specified for that assembly rather than the stock-style application.

Inspect the pivot and protection

A worn pivot or damaged boot can accompany a damaged lever. Check the clutch and brake sides separately because their hardware references differ. Count the bolt-and-nut sets required and follow service guidance for the completed control assembly.

Ordering questions

Do the brake and clutch pivot sets use the same fasteners?

No. Brake set 73-1031 replaces bolt 90114-MA5-671 and nut 94050-06000. Clutch set 73-0998 replaces bolt 90113-422-000 and nut 94002-06000-0S. Each supplies one bolt and one nut; select for the fitted control rather than interchanging the sets.

Will a stock-style lever fit an aftermarket cylinder?

Do not assume so. For example, replacement lever 08-0430 is specifically for master-cylinder assembly 08-0262. That is a different selection from the stock-style black or chrome lever. Identify the installed master cylinder and use the lever specified for that unit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×