VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB900F — Amortisseurs

The rear-shock order for a 1982 CB900F Supersport should start with length and mounting condition. Compare the 365mm replacement set with the shocks on the motorcycle, then decide whether separate joint rubbers or mounting fasteners also need attention.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB1100 CB900 CB750 CB650 shock absorber set stock 365mm length

Honda CB1100 / CB900 / CB750 / CB650 Shock Absorber Set ~ Stock 365mm Length

$139.95 USD
73-1108
Upgrade your suspension with this premium black shock absorber set, designed for Honda sport and standard bikes. Featuring a black body and progressive wound...
Honda CB750 DOHC chrome 365mm shock absorber set

1979-82 Honda CB750 DOHC Stock Length Shock Absorber Set ~ Chrome 365mm

$139.95 USD
06-3629
Go with a cleaner, less detailed all-chrome look using this 365mm Stock-Length Shock Absorber Set without the end cap. Chrome body with chrome progressive-wound...
Honda CB750 DOHC 365mm stock length shock absorber set

1979-82 Honda CB750 DOHC Stock Length Shock Absorber Set ~ 365mm

$139.95 USD
06-3604
Fit the taller DOHC CB750, CB900, and CB1100 lineup with this 365mm Stock-Length Shock Absorber Set. Black body with chrome progressive-wound heavy-duty springs, measuring...
Honda CB750 DOHC chrome 365mm shock absorber set

1979-82 Honda CB750 DOHC Stock Length Shock Absorber Set ~ Chrome 365mm

$139.95 USD
06-3626
Kit out your late-model CB750, CB900, or CB1100F with this 365mm All-Chrome Stock-Length Shock Absorber Set with end cap. Chrome body, chrome progressive-wound heavy-duty...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1982 Honda CB900F Supersport · Rear Shocks & Mounts Buying guide

Check the mount before adding another set of parts

The black-body, chrome-spring shock set comes with fitting hardware and a preload wrench. Separate joint rubbers are offered as a two-piece set, allowing mounting-rubber service to be considered on its own.

Parts to consider

1979-82 Honda CB750 DOHC Stock Length Shock Absorber Set ~ 365mm Black-body, chrome-spring shocks365mm eye-to-clevis set with four preload positions and fitting hardware.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Two shock joint rubbersTwo-piece rubber set replacing reference 52484-292-000.Voir la pièce

Pièces connexes : Replacement mounting nut · Replacement mounting washer

Separate preload from damping

The featured pair lists four spring-preload positions and includes bushings, inserts, washers and a preload wrench. Preload changes the spring setting; it does not repair a leaking or ineffective damper. Honda’s original F units have separate damping adjustments, which are not promised for this replacement pair.

Do not let finish hide a length change

The 290mm choices are custom-length units, not another finish of the 365mm pair. Check the complete geometry, travel and clearance implications before changing length. Original F damper reservoirs are pressurized; do not open or heat them as a home repair.

Buying questions

Should I replace the shocks or only their joint rubbers?

Inspect the damper bodies for leakage and damage, assess damping, and check the mounts for movement. Sound dampers with worn joint rubber may need mounting repair; leaking or ineffective dampers need a different solution. Confirm the replacement bush dimensions and hardware fit before assembly.

Will turning up spring preload cure a bouncing or leaking shock?

No. Preload adjusts the spring setting for the load; it cannot restore lost damping or seal a leaking body. Inspect the damper and use the fitted shock’s instructions for adjustment. Do not assume the replacement pair has the original F unit’s separate rebound and compression controls.

What should be checked before fitting a different shock length?

Compare upper and lower mounts, installed length, suspension travel and tire, chain and exhaust clearances through movement. Include stand operation in the assessment. The listed 290mm custom units require a modification plan rather than a direct stock-length substitution.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB900F

Votre panier

×