1982 Honda CB900F — Plaquettes, mâchoires, durites et tiges de frein
The pad selection for the 1982 CB900F offers front and rear service options in different listed thicknesses. Front pads measure 90 x 49 x 9mm; rear options measure 90 x 49 x 10.5mm. Confirm position before comparing Kevlar and sintered materials or counting how many packages to buy.
1975 Honda CB750F Motorcycle Parts1976 Honda CB750F Motorcycle Parts1977 Honda CB750F Motorcycle Parts1978 Honda CB750F Motorcycle Parts1979 Honda CB750F Motorcycle Parts1980 Honda CB750F Motorcycle Parts1980 Honda CB900C Motorcycle Parts1981 Honda CB750F Motorcycle Parts1981 Honda CB900C Motorcycle Parts1981 Honda CB900F Motorcycle Parts1982 Honda CB750F Motorcycle Parts1982 Honda CB900C Motorcycle Parts1982 Honda CB900F Motorcycle Parts1983 Honda CB1000C Motorcycle Parts1983 Honda CB1100F Motorcycle PartsHonda CB Brake & Clutch PartsHonda CB Brake Pads, Shoes, Hoses & RodsHonda CB1000 Motorcycle Parts by Model & YearHonda CB750 DOHC Parts (1979–1982)Honda CB750 Motorcycle Parts by Model & YearHonda CB750 SOHC Parts (1969–1978)Honda CB750F Motorcycle Parts (1975–1982)Honda CB900 Motorcycle Parts by Model & YearHonda CB900C Custom Motorcycle Parts (1980–1982)Honda CB900F Supersport Motorcycle Parts (1981–1982)Series 4: CB900-1100 (80-83)
Replace your brake rod pin with this Brake Rod Pin, replacing OEM #46503-371-000.Key Features• Brake rod pin• Replaces OEM #46503-371-000Fitment / Compatibility• Honda CB750F...
Position and package coverage come before material
Choose pads for the actual front or rear caliper before comparing Kevlar and sintered material. Inspect the disc, pad pins and caliper movement at the same time; uneven wear or a dragging brake can point to a fault that new pads alone will not cure.
The rear pad’s product name includes front/rear because it is used in other positions on other models. For this motorcycle, its listed application is rear only. Keep that distinction with the dimensions when comparing it against the front pad choices.
A pedal that stays down needs a wider check
The pedal return spring acts at the pedal-to-spindle connection; the brake-light switch spring operates the switch. Honda shows these as separate springs. Inspect the pedal pivot and linkage as well as both springs, and confirm the rear brake releases rather than using a new return spring to conceal binding.
Buying questions
What should I check if the pads have worn unevenly?
Inspect piston movement, caliper sliding parts, pad pins and the disc before fitting another set. Replace pads in pairs within a caliper and use the correct front or rear application. A sticking mechanism can quickly damage new pads or leave the brake dragging.
Can the thicker front/rear pad be used at the CB900F front?
The 90 x 49 x 10.5mm product specifies rear use on the 1981–82 CB900F. The offered front pads are 90 x 49 x 9mm. A shared outline or front/rear title does not make the two thicknesses interchangeable on this motorcycle.
Is the pedal return spring the brake-light switch spring?
No. The return spring helps return the pedal at the spindle; the separate switch spring pulls the rear brake-light switch. Identify the damaged part by its location, then check pedal return and brake-light operation after repair.
Vous ne savez pas quelle pièce choisir ?
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.