VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB900C — Poignées

Choose the grip-end style that suits your 1982 CB900C Custom’s current handlebar setup. Closed-end replicas and open-end replicas with supplied plugs both use black rubber, a 130 mm length and 7/8-inch handlebar fit; inspect the throttle-side arrangement before making the choice.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1982 Honda CB900C Custom · Grips & End Options Buying guide

Choose between a closed rubber end and separate plugs

The principal choice here is the grip end. Both options are OEM-type replicas with the same stated length; compare the handlebar diameter, throttle sleeve and any bar-end fittings before ordering either style.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack OEM-type replica grips for 7/8-inch handlebars, 130 mm long, with closed ends.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica grips with plugsBlack 130 mm OEM-type replica grips for 7/8-inch handlebars; open ends and end plugs included.Voir la pièce

Match length before end style

Both featured options are 130 mm long for 7/8-inch handlebars. Compare that with the fitted controls and throttle sleeve before ordering. A correct-looking tread pattern does not address a length mismatch, so settle the physical fit before choosing the appearance of the ends.

Check what the open-end package adds

The open-end grips include separate end plugs. Compare those with the motorcycle’s current bar-end arrangement, and check the mounting requirements of any accessories you intend to retain. Keep mirror or weight mounting hardware requirements separate from the choice of rubber grip and its supplied plugs.

Grips & End Options questions

Will choosing an open end cure a binding throttle?

It may change outer-end clearance, but binding can also come from the throttle sleeve, housing or cable routing. Both grip styles are 130 mm long. Inspect those parts and verify free throttle return through the steering range after fitting.

Are the supplied end plugs mounting hardware for accessories?

The open-end grip set includes plugs for the grip ends. It does not include a verified mounting system for bar-end mirrors or weights. Select those accessories by their own fittings and check that they cannot obstruct the throttle.

What should I check on the throttle side?

Compare the fitted throttle sleeve, available grip length and end clearance with the replacement. Use the correct service instructions for installation and verify unrestricted throttle operation before the motorcycle returns to service.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB900C

Votre panier

×