VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB900C — Couvercles moteur et accessoires

Compare the spark-advancer cover and removed screws before buying replacements for your 1981 CB900C Custom. The chrome cover, rubber O-ring and three-piece fastener set are separate products. Inspect the sealing face as well as the visible chrome when planning the repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Couvercles moteur et accessoires

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 spark advancer cover gasket 30372-425-000

Honda CB1100 / CB1000 / CB900 / CB750 Spark Advancer Cover Gasket ~ Replaces 30372-425-000

$7.95 USD
18-7059
Replace your DOHC CB's spark advancer cover gasket with this Spark Advancer Cover Gasket (rubber O-ring), replacing OEM #30372-425-000.Key Features• Spark advancer cover gasket...
Honda CB1000 CB900 CB750 spark advancer cover screw set 93700-06025-0A

Honda CB1000 / CB900 / CB750 Spark Advancer Cover Screw Set ~ Replaces 93700-06025-0A

$3.50 USD
73-0900
Replace your spark advancer cover screws with this Spark Advancer Cover Screw Set of 3 in 6x25 size, replacing OEM #93700-06025-0A.Note: the 1980 bikes...
Épuisé
Honda CB valve tappet cover rocker cap 12361-300-000

Honda CB Valve Tappet Cover / Rocker Cap ~ Replaces 12361-300-000

$6.95 USD
01-9980
Dress up your Honda's top end with this Valve Tappet Cover (Rocker Cap), an aftermarket finned chrome-plated replacement for OEM #12361-300-000. Fits an exceptionally...
Honda CB1100 CB1000 CB900 CB750 starter motor cover gasket 31282-425-300

Honda CB1100 / CB1000 / CB900 / CB750 Starter Motor Cover Gasket ~ Replaces Honda OEM 31282-425-300

$11.69 USD
18-7070
Starter Motor Cover Gasket ~ Replaces Honda OEM 31282-425-300 for the Honda CB models listed below. Use this part for repair, restoration, or replacement...
Honda CB1000 CB900 CB750 chrome spark advancer cover 30371-425-010

Honda CB1000 / CB900 / CB750 Chrome Spark Advancer Cover ~ Replaces 30371-425-010

$64.95 USD
73-0050
Replace a worn spark advancer cover with this Chrome Spark Advancer Cover, replacing OEM #30371-425-010. These covers are often dented, rusted, or worn; a...
Comparer

1981 Honda CB900C Custom · Advancer Cover & Seals Buying guide

Inspect the ignition cover and seal as a matched repair

The chrome spark-advancer cover protects an ignition assembly; it is separate from the generator and clutch covers. Match its mounting and rubber sealing ring, and check for damage behind a dented cover rather than treating the job as chrome replacement alone.

Parts to consider

Honda CB1000 / CB900 / CB750 Chrome Spark Advancer Cover ~ Replaces 30371-425-010 Chrome spark-advancer coverReplacement cover; its rubber O-ring gasket is supplied separately.Voir la pièce Honda CB1100 / CB1000 / CB900 / CB750 Spark Advancer Cover Gasket ~ Replaces 30372-425-000 Spark-advancer cover sealRubber O-ring gasket for the cover; reference 30372-425-000.Voir la pièce Honda CB1000 / CB900 / CB750 Spark Advancer Cover Screw Set ~ Replaces 93700-06025-0A Cover screw three-packThree 6 × 25 screws, reference 93700-06025-0A, listed for the 1981 Custom.Voir la pièce

A new cover does not repair the mechanism beneath it

Honda checks spark-advancer operation as part of ignition service. If the cover has been struck, inspect the enclosed components and clearance before fitting the replacement. A damaged advancer or pulser assembly needs its own diagnosis; changing the outer cover will not correct ignition timing faults.

Match the seal and fasteners to the cover

The chrome cover and rubber O-ring are separate purchases. The linked 1981 screw set contains three 6 × 25mm fasteners, but a swapped cover or engine still needs direct comparison. Keep their positions and lengths correct and use Honda’s tightening procedure.

Buying questions

Does a replacement chrome cover cure an ignition misfire?

Not by itself. Inspect for contact or damage underneath, then follow Honda’s ignition checks if the symptom remains. A damaged internal component needs its own repair; avoid disturbing pulser settings during a cosmetic cover change.

Should a flat paper gasket be used with this cover?

The listed sealing part is a rubber O-ring, reference 30372-425-000. Match the old ring and its seating area. A gasket for another engine cover does not become suitable because the outer cover looks similar.

What should I check before reusing the old screws?

Inspect the heads and threads, and keep their original positions and lengths. Damaged threads or screws that bottom before clamping need attention before the cover is refitted; extra tightening can damage the housing.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB900C

Votre panier

×