VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB1100F — Flotteurs et composants de carburateur

On the 1983 Honda CB1100F carbs, this category supplies floats with pins, an accelerator pump diaphragm kit, the air cut-off valve, drain screws, felt shaft seals, connector tube O-rings and two screw kits. Quantities are listed per pack or per bike.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 carb fuel connector tube and accelerator tube

Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings

$15.26 USD
73-0831
Replace your carb fuel and accelerator tube O-rings with these Carburetor Fuel Connector Tube and Accelerator Tube O-Rings, 12 O-rings.Key Features• Carb fuel connector...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw o-rings pk 4

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...
Honda CB1100 CB1000 CB900 CB750 DOHC screw set

Honda CB1100 / CB1000 / CB900 / CB750 DOHC Screw Set

$39.95 USD
73-0099
Refresh DOHC carb hardware top to bottom with this 71-Piece DOHC Screw Set. Includes front stay plate screws (8), CV cap screws (8), throttle...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB1100 CB1000 CB900 CB750 float bowl screws pk 2 93892-04016-00

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Nouveau
Honda CB1100F CB1000C carburetor screw kit

1983 Honda CB1100F / CB1000C Carburetor Screw Kit

$23.45 USD
49-0774
Refresh your CB1000C or CB1100F carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Honda CB1100F CB1000C carb pump diaphragm 16021-ME2-751

1983 Honda CB1100F / CB1000C Carb Pump Diaphragm ~ Replaces 16021-ME2-751

$27.95 USD
20-9044
Rebuild your CB1000C or CB1100F Keihin carb accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-ME2-751 / #16021-MG1-671. Kit contains 1 diaphragm with...
Honda CB1100F CB1000C air cut off valve 16048-KB7-004

1983 Honda CB1100F / CB1000C Air Cut Off Valve ~ Replaces 16048-KB7-004

$19.95 USD
20-4027
Replace your CB1000C or CB1100F's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-KB7-004 (diaphragm + 1 spring + 1...
Comparer

1983 Honda CB1100F · Carb Floats & Components Buying guide

Small carb parts that cause big problems

Leaking connector O-rings, a split pump diaphragm or a failed air cut-off valve can all upset running. Inspect each during a rebuild and order the parts that are worn.

Carb components to consider

1983 Honda CB1100F / CB1000C Carb Pump Diaphragm ~ Replaces 16021-ME2-751 Accelerator pump diaphragm kitDiaphragm with rod, bellow rubber and O-rings for the CB1000C and CB1100F.Voir la pièce 1983 Honda CB1100F / CB1000C Air Cut Off Valve ~ Replaces 16048-KB7-004 Air cut-off valveDiaphragm, spring and O-ring replacing 16048-KB7-004 on the CB1100F.Voir la pièce Honda CB Carb Float ~ Replaces 16013-413-851 Carb float with pinReplaces 16013-413-851; the listing says four are used per bike.Voir la pièce

Pièces connexes : Connector tube O-rings · CB1100F carb screw kit · Float bowl drain screw

Accelerator pump and air cut-off

The pump diaphragm kit replaces 16021-ME2-751 and 16021-MG1-671, and the air cut-off valve replaces 16048-KB7-004. Both list the 1983 CB1000C and CB1100F. Inspect each diaphragm for pinholes and stiffness whenever the carbs are apart for a rebuild or cleaning.

Screw kits for a tidy rebuild

The CB1100F and CB1000C carb screw kit includes four drain screws with O-rings plus sized screws with lock washers. The 71-piece DOHC screw set covers stay plates, caps, bowls and more. Compare contents before buying both.

Carb component questions

How many floats are used on the CB1100F?

The float listing says four floats are used per bike. Each float includes its pin and replaces OEM 16013-413-851, and the listing names the CB1100F, so order the number of floats you need.

What is in the accelerator pump kit?

The kit contains one diaphragm with rod, one bellow rubber and O-rings. It replaces 16021-ME2-751 and 16021-MG1-671 and lists the 1983 CB1000C and CB1100F Keihin carburetors.

How many felt seals come in each set?

The throttle and choke shaft seal set holds twelve felt seals. A separate Keihin PD throttle shaft seal set holds six. Both list the 1983 CB1100F in their fitment.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB1100F

Votre panier

×