VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB1000C — Outils pour moteur, direction et embrayage

Workshop tools for the 1983 Honda CB1000C cover three areas: the clutch, where two hub nut tools are offered, the alternator, where a threaded puller frees the rotor, and the front end, where a 39mm installer seats fork seals. A filter wrench rounds it out.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 alternator rotor puller

Honda CB Alternator Rotor Puller

$12.95 USD
35-0035
Pull your DOHC CB alternator rotor with this Alternator Rotor Puller, 18mm x M1.5 right-hand thread, for internal-thread rotors and flywheels.Key Features• Alternator rotor...
Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB1100F CB1000C CB900F CB700SC 39mm fork seal driver

1981-86 Honda CB1100F / CB1000C / CB900F / CB700SC 39mm Fork Seal Driver

$39.95 USD
35-4298
Install 39mm fork seals cleanly with this 39mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of 39mm fork...
Comparer

1983 Honda CB1000C · Engine & Clutch Tools Buying guide

Build the tool list around the repair

A clutch-center job, rotor removal and fork-seal replacement need different tools. Check the relevant CB1000C service procedure before ordering so you can separate the specialist tool from the ordinary sockets, holding equipment and measuring tools needed for the work.

Tools to consider

Honda CB Clutch Center Nut Removal Tool ~ Premium Premium clutch nut tool35-0076 has 20mm and 24mm ends and accepts a 1/2-inch square drive.Voir la pièce Honda CB Alternator Rotor Puller Alternator rotor puller35-0035 is specified with an 18mm × 1.5 right-hand thread for internally threaded rotors.Voir la pièce Honda CB Clutch Center Nut Removal Tool Clutch center nut tool35-0051 has a 24mm inside diameter and accepts a 3/8-inch square drive.Voir la pièce

Pièces connexes : Spin-on oil filter wrench · 39mm fork seal driver

Check the fork assembly before choosing a driver

The split carbon-steel driver 35-4298 is listed for the CB1000C’s 39mm fork application. Check the driver and seal applications separately, particularly on a motorcycle with a replacement front end.

Rotor puller

Honda’s CB1000C manual shows the stator and brush holder being removed from the alternator cover before the separate rotor-removal operation. You do not need to add a rotor puller merely to access those cover-mounted parts; choose it when the planned repair requires removing the rotor.

Tool questions

Does the tripod filter wrench suit the original filter housing?

No. Wrench 35-9022 is specified for the listed aftermarket spin-on filters, including 15-1006. It does not remove the original center-bolt-retained housing. Check which filter arrangement is on the motorcycle before adding this tool to an oil-service order.

Does a clutch-nut socket also hold the clutch stationary?

No. Honda’s CB1000C clutch procedure shows a clutch-center holder and a lock-nut wrench as separate tools. Either listed nut socket addresses the nut; plan the separate holding equipment required by the procedure as well. The premium socket’s extra end does not replace the holder.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB1000C

Votre panier

×