VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB750SC — Allumage, contacteurs, bobines, bougies et rupteurs

A Dynatek coil order for a 1986 Honda CB750SC depends on the ignition installed, not just the motorcycle’s model label. Confirm resistance and mounting compatibility first. Then compare the two-coil package with the version that includes cut-to-fit plug wires.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Allumage, contacteurs, bobines, bougies et rupteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 CB750 CB700 spark plug cap SD05F

Honda CB750 Spark Plug Cap – SD05F

$10.49 USD
23-3115
Replace your spark plug caps with this Spark Plug Cap, SD05F type. Two required per CB750.Key Features• Spark plug cap, SD05F• 2 required per...
Dynatek 3 ohm ignition coil set 2 with plug wires Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2 with Plug Wires

$389.00 USD
07-9974
Combine Dynatek's performance coils with matching plug wires in one package using this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2 with...
Honda CB1100 CB1000 CB900 CB750 replacement coil tower boots

Honda CB1100 / CB1000 / CB900 / CB750 Replacement Coil Tower Boots

$4.95 USD
17-6830
Replace the tower boots on your performance coils with this Coil Tower Boots 2-pack. Fits performance coils #17-6810, #07-9973, #07-9979, and #07-9980.Key Features• Coil...
Dynatek 3 ohm ignition coil set 2 Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2

$289.00 USD
07-9980
Match your Dyna-style electronic ignition requirement with this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2. Same Dynatek quality as the 5...
Comparer

1986 Honda CB750SC · Custom Ignition Coil Options Buying guide

Choose the compatible coil before its wire package

Both options are dual-output 3-ohm coil pairs. Their difference is the supplied wire package, while the separate tower boots are accessories for particular performance coils rather than a universal stock replacement.

Parts to consider

Dynatek Performance 3 Ohm Ignition Coil Set/2 Dynatek 3-ohm coil pairTwo dual-output 3-ohm coils with hardware and instructions. Confirm the ignition requirement and mounting before choosing them.Voir la pièce Dynatek Performance 3 Ohm Ignition Coil Set/2 with Plug Wires Dynatek coils with plug wiresTwo 3-ohm dual-output coils with a cut-to-fit 7mm copper-core wire set, hardware and instructions.Voir la pièce Honda CB1100 / CB1000 / CB900 / CB750 Replacement Coil Tower Boots Performance-coil tower bootsTwo boots per pack, including compatibility with the listed Dynatek coil pair; identify the fitted coils first.Voir la pièce

Treat the electrical match as the first gate

The coil rating must suit the ignition system’s required primary resistance. A lower resistance is not an automatic improvement and must not fall below the system’s requirement. Follow the ignition manufacturer’s specification and check the physical installation before selecting either package.

Compare the supplied installation pieces

The coil pair comes with hardware and instructions. The wire-equipped package additionally includes 7mm silicone-covered copper-core wire for cutting to fit, with finished plug-boot ends and loose coil terminals. Choose it where that custom-fitting wire scope suits the compatible installation.

Buying questions

Are the wires pre-cut for the 1986 motorcycle?

The wire package is cut-to-fit. Plan the routing and termination for the compatible installation rather than treating it as a model-specific pre-cut harness.

How many coils are supplied in these packages?

Each featured Dynatek package contains two dual-output coils. Match the ignition and installation requirements before choosing the version with or without the additional wire set.

What is the separate boot-pack quantity?

The tower boots come two per pack. They fit specified performance coils, so identify the coil model first and count the towers being serviced before choosing the order quantity.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB750SC

Votre panier

×