VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB750SC — Électricité

Identify the electrical equipment fitted to your 1986 Honda CB750SC before choosing service parts. The brush set requires a particular starter construction, while the Dynatek coil options require a compatible ignition specification and installation. These choices address different faults and repair plans.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Électricité

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 CB750 CB700 spark plug cap SD05F

Honda CB750 Spark Plug Cap – SD05F

$10.49 USD
23-3115
Replace your spark plug caps with this Spark Plug Cap, SD05F type. Two required per CB750.Key Features• Spark plug cap, SD05F• 2 required per...
Honda CB1100 CB1000 CB900 CB750 CB450 alternator rotor puller

Honda CB Alternator Rotor Puller

$12.95 USD
35-0035
Pull your DOHC CB alternator rotor with this Alternator Rotor Puller, 18mm x M1.5 right-hand thread, for internal-thread rotors and flywheels.Key Features• Alternator rotor...
Honda CB1100 CB1000 CB900 CB750 starter motor brush set 31201-292-158

Honda CB Starter Motor Brush Set ~ Replaces 31201-292-158

$29.95 USD
24-2021
Replace your Mitsuba 2-brush starter motor brushes with this Replacement Starter Brush Set of 2, 12mm x 14mm x 6mm, 1 piece with insulated...
Dynatek 3 ohm ignition coil set 2 with plug wires Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2 with Plug Wires

$389.00 USD
07-9974
Combine Dynatek's performance coils with matching plug wires in one package using this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2 with...
Honda CB1100 CB1000 CB900 CB750 replacement coil tower boots

Honda CB1100 / CB1000 / CB900 / CB750 Replacement Coil Tower Boots

$4.95 USD
17-6830
Replace the tower boots on your performance coils with this Coil Tower Boots 2-pack. Fits performance coils #17-6810, #07-9973, #07-9979, and #07-9980.Key Features• Coil...
Dynatek 3 ohm ignition coil set 2 Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2

$289.00 USD
07-9980
Match your Dyna-style electronic ignition requirement with this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2. Same Dynatek quality as the 5...
Comparer

1986 Honda CB750SC · Electrical Service Choices Buying guide

Match the installed electrical equipment first

The starter brush set is dimensioned for a Mitsuba two-brush motor. The performance-coil pair has a 3-ohm rating and separate installation requirements, so neither should be selected from the motorcycle name alone.

Parts to consider

Honda CB Starter Motor Brush Set ~ Replaces 31201-292-158 Mitsuba starter brush setTwo brushes, 12 × 14 × 6mm, for Mitsuba two-brush starters: one insulated lead and one non-insulated lead.Voir la pièce Dynatek Performance 3 Ohm Ignition Coil Set/2 Dynatek 3-ohm coil pairTwo dual-output 3-ohm coils with hardware and instructions. Confirm the ignition requirement and mounting before choosing them.Voir la pièce Honda CB1100 / CB1000 / CB900 / CB750 Replacement Coil Tower Boots Performance-coil tower bootsTwo boots per pack, including compatibility with the listed Dynatek coil pair; identify the fitted coils first.Voir la pièce

Pièces connexes : Alternator rotor puller · Dynatek coils with plug wires

Inspect the starter before selecting internals

The brush set contains two 12 × 14 × 6mm brushes, one insulated-lead and one non-insulated-lead type. Check the motor actually fitted and its condition. If it has a different brush arrangement or has been replaced, identify that unit’s own service parts before ordering.

Use the ignition requirements for coil selection

The Dynatek pair is a conditional custom option with a 3-ohm primary rating. Confirm the ignition manufacturer’s resistance specification, mounting and connections before choosing it. The separate tower boots suit specified performance coils and should also be matched to the coils already fitted.

Buying questions

Can I choose the brush set after a starter swap?

Only after identifying the replacement starter and comparing its construction, brush dimensions and leads. This set is for the specified two-brush Mitsuba arrangement, not every motor that may be installed.

What coil rating must be checked?

The Dynatek pair is rated at 3 ohms. Use the installed ignition’s required primary resistance and do not select a lower resistance than the ignition manufacturer permits.

Are the tower boots universal original-coil replacements?

They are for named performance coils, including the featured Dynatek pair. Identify the actual coil model and tower arrangement before selecting replacement boots.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB750SC

Votre panier

×