VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB750SC — Tubes, ressorts, joints et soufflets de fourche

Check the fork assembly on your 1983 CB750SC before selecting its seals. Main oil seals, outer dust seals and cap O-rings serve different joints and are separately packaged. Match the old parts and inspect the sliding surfaces, particularly if an earlier repair replaced the original front end.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 CB650 CB550 fork seals

Honda CB900 / CB750 / CB650 / CB550 Fork Seals

$21.95 USD
27-1028
Replace your DOHC Supersport or Nighthawk fork seals with this Fork Seal Set, 37 x 50 x 11mm. Made in Japan by OEM supplier.Key...
Honda CB900 CB750 CB650 fork cap o-ring set 2 91344-PC9-004

1980-83 Honda CB900 / CB750 / CB650 Fork Cap O-Ring Set/2 ~ Replaces 91344-PC9-004

$2.95 USD
73-0915
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #91344-PC9-004.Key Features• Fork cap O-rings• Set of 2• Replaces...
Honda CB900 CB750 CB650 CB550 fork dust seal set

Honda CB900 / CB750 / CB650 / CB550 Fork Dust Seal Set

$25.95 USD
27-1050
Replace your DOHC Supersport / Nighthawk fork dust seals with this Fork Dust Seal Set of 2. OEM-quality parts made in Japan.Key Features• Fork...
Nouveau
Universal motorcycle headlight reflector rubber base 33743-425-600

Universal Motorcycle Headlight Reflector Rubber Base ~ Replaces 33743-425-600

$16.95 USD
99-4979
Upgrade or restore your Honda motorcycle’s headlight assembly with this Headlight Reflector Rubber Base — precision‑designed to replace OEM #33743‑425‑600. This rubber base provides...
Nouveau
Honda CB750 CB650 headlight stay headlight reflector bolt 90120-425-000

1979-83 Honda CB750 / CB650 Headlight Stay / Headlight Reflector Bolt ~ Replaces 90120-425-000

$8.95 USD
99-4975
Replacement headlight stay bolt for restoring your CB750's headlight assembly back to proper condition. This is the bolt that fastens through the headlight ears,...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Comparer

1983 Honda CB750SC · Fork Sealing Parts Buying guide

Identify the sealing position before selecting the set

The main seal set specifies 37 × 50 × 11mm. Dust seals come as two pieces, and cap O-rings are another two-piece set. Choose by the joint needing service rather than buying from the word seal alone.

Parts to consider

Honda CB900 / CB750 / CB650 / CB550 Fork Dust Seal Set Fork dust seal pairSet of two replacement fork dust seals, made in Japan.Voir la pièce Honda CB900 / CB750 / CB650 / CB550 Fork Seals Fork seal setFork seals specified at 37 × 50 × 11mm for the early Nighthawk fork application.Voir la pièce 1980-83 Honda CB900 / CB750 / CB650 Fork Cap O-Ring Set/2 ~ Replaces 91344-PC9-004 Fork cap O-ringsSet of two fork cap O-rings, reference 91344-PC9-004.Voir la pièce

Separate the three sealing choices

Main seals, dust seals and cap O-rings are individual product packages. The two-piece counts explicitly belong to the dust and cap sets. Compare the actual joint and the complete contents before deciding whether one package or several are needed for the service.

Inspect the parts that will remain

New seals cannot repair a damaged sliding surface. Check the tubes, housings and other retained components as part of the fork assessment. Follow the applicable Honda service information for the assembly actually installed, rather than borrowing a procedure from a broadly similar model.

Fork Sealing Parts questions

What identifies the main seal dimensions?

The product lists 37 × 50 × 11mm. Compare the removed seals and fork assembly before ordering, especially if the front end has been exchanged for another model’s components.

Does a dust-seal pack contain two pieces?

Yes. The dust seals are supplied as a pair, separate from the main oil-seal set. Inspect the existing dust protection before adding that package to the repair order.

Are the fork-cap O-rings part of the main seal set?

They are separately listed as a two-piece package. Identify the cap sealing arrangement and review each product’s contents before assuming one seal order covers all fork joints.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB750SC

Votre panier

×