VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB700SC — Outils pour moteur, direction et embrayage

This 1985 CB700SC tool selection covers two service jobs: removing supported spin-on filters and installing fork seals. Match the tripod wrench to the fitted filter, or the split driver to the 39 mm fork application. Check working room before buying a tool for either job.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB1100F CB1000C CB900F CB700SC 39mm fork seal driver

1981-86 Honda CB1100F / CB1000C / CB900F / CB700SC 39mm Fork Seal Driver

$39.95 USD
35-4298
Install 39mm fork seals cleanly with this 39mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of 39mm fork...
Comparer

1985 Honda CB700SC · Filter Wrench & Fork Driver Buying guide

Choose a tool for the fitted filter or fork

These tools have distinct applications and should be selected independently. Confirm the part being serviced, its size and available access before deciding which tool belongs in the workshop order.

Parts to consider

1981-86 Honda CB1100F / CB1000C / CB900F / CB700SC 39mm Fork Seal Driver Split 39 mm fork-seal driverCarbon-steel split driver for 39 mm fork-seal installation; listed for CB700SC forks.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Tripod oil-filter wrench3/8-inch drive tripod wrench for the specified aftermarket spin-on filters.Voir la pièce

Check the filter tool interface

The tripod wrench uses a 3/8-inch drive and is intended for the specified aftermarket spin-on filters. Compare the filter and access space on the motorcycle. An exhaust change or different filter arrangement can affect the tool choice even when its drive size suits your equipment.

Use the fork driver with the correct assembly

The split driver is for the 39 mm fork application, with replacement seals purchased separately. The original CB700SC fork is air-assisted; Honda’s procedure addresses trapped air, cap spring pressure and separate right/left fluid requirements. Choosing the correct driver does not remove those preparation steps.

Buying questions

Will the wrench clear my exhaust and filter location?

Inspect the installed filter and surrounding space before ordering. Its 3/8-inch drive and supported spin-on application do not guarantee access around every modified exhaust arrangement.

Does the 3/8-inch drive size prove that the wrench fits an oil filter?

No. That is the connection for the driving tool. Wrench 35-9022 is listed for the specified aftermarket spin-on filters; the filter’s shape and the working clearance must also suit the tripod tool.

Can the 39 mm driver be selected from the oil seal’s 51 mm outer size?

Choose from the stated 39 mm fork application. The seal is listed as 39 × 51 × 8/10 mm, and its outer diameter is a different measurement. A swapped fork needs its own seal and driver specification.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB700SC

Votre panier

×