VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB700SC — Cadre et carrosserie

Bodywork renewal on the 1985 CB700SC is easier when the mounting pieces are checked alongside the visible panels. Confirm the original seat shape before buying its cover, inspect the tank supports and count sidecover B dampers by side. Reproduction bodywork may need a separate comparison.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Cadre et carrosserie

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB side stand rubber 50548-356-700

Honda CB Side Stand Rubber ~ Replaces 50548-356-700

$8.74 USD
02-6537
Take the rattle out of your side stand with this Side Stand Rubber Cushion, a direct replacement for OEM #50548-356-700. Fits a broad range...
Honda CB sidecover damper rubber b 83551-300-000

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000

$2.54 USD
02-6531
Keep your sidecovers snug and rattle-free with this Rubber Sidecover Damper B, a direct replacement for OEM #83551-300-000. Fits an exceptionally broad range of...
Honda CB1100 CB1000 gearshift lever rubber 24781-419-000

Honda CB Stock Type Gearshift Lever Rubber ~ Replaces 24781-419-000

$7.50 USD
73-0838
Replace your gearshift lever rubber with this Stock Type Gearshift Lever Rubber, replacing OEM #24781-419-000.Key Features• Stock-type gearshift lever rubber• Replaces OEM #24781-419-000• Honda...
Honda CB1000 CB900 CB750 passenger rear footpeg pin and cotter pin set 95015-83000

Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set

$7.00 USD
73-0945
Replace your passenger rear footpeg pins with this Passenger Rear Footpeg Pin & Cotter Pin Set. Includes 2 footpeg pins and 2 cotter pins....
Honda CB front fuel tank rubber cushion 17611-KE8-000

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...
Épuisé
Honda CB700SC seat cover replacement

1984-86 Honda CB700SC Seat Cover

$99.95 USD
73-1089
Refresh your seat with this Replacement Seat Cover (no hardware included; just re-use existing hardware). There is not a "Honda" stencil on the rear...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Comparer

1985 Honda CB700SC · Bodywork & Mounting Parts Buying guide

Check the supports before renewing the visible finish

A good-looking panel or cover still needs suitable support underneath. Identify the original mounting shapes and inspect the worn rubber, foam or hardware before deciding what the restoration order needs.

Parts to consider

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000 Genuine Honda front tank cushionGenuine Honda 17611-KE8-000 front fuel-tank cushion, sold individually.Voir la pièce Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000 Sidecover damper BSold individually; the CB700SC application specifies one on the right and one on the left.Voir la pièce 1984-86 Honda CB700SC Seat Cover Original-seat replacement coverCover for the original CB700SC seat. Includes installation and foam-repair instructions; no mounting hardware or Honda stencil.Voir la pièce

Choose the seat repair realistically

The replacement cover is intended for the original CB700SC seat. It includes installation and foam-repair guidance, but the existing pan, foam and reusable hardware need inspection. A cut-down seat or replacement pan requires its own shape assessment before this cover can be chosen.

Use model-specific rubber quantities

The 1985 CB700SC uses one B-type sidecover damper on each side. Front tank cushions form a separate left-and-right support pair. Both products are sold individually: replacing both B dampers needs two dampers, and replacing both front tank supports needs two tank cushions.

Buying questions

Does the cover have the original rear Honda stencil?

No Honda stencil is provided on the rear of this replacement cover. Consider that appearance detail before ordering for a restoration with specific finish requirements.

Will the cover fit a lowered or reshaped CB700SC seat?

Its application is the original stock seat shape. Compare the pan, foam contour and attachment positions before stripping the old cover; a lowered foam profile or replacement pan needs a separate fit assessment.

Can I choose a non-genuine tank cushion?

An aftermarket version is separately listed for the same stated reference and model application. Compare the mount shape and choose with the genuine-versus-aftermarket manufacture distinction clear.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB700SC

Votre panier

×