VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB750L — Joints et fixations

Build the Limited exhaust hardware order by the connection being opened. A cylinder-head port gasket, a separate headpipe joint seal and a manifold stud solve different needs. Check the installed exhaust and damaged fasteners before choosing quantities or assuming a single gasket product covers the whole job.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Joints et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 exhaust headpipe gasket (each) 18291-254-000

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-254-000

$3.42 USD
17-2812
Replace one exhaust port gasket on your CB750 or big-bore DOHC CB with this Exhaust Port Gasket, 1 piece, replacing OEM #18291-254-000 / #18291-MM5-860....
Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Épuisé
Honda CB1100 CB1000 CB900 exhaust headpipe gasket (each) 18291-MM5-860

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-MM5-860

$6.84 USD
18-7013
Replace one cylinder-head-to-exhaust-headpipe gasket on your big-bore Honda with this Cylinder Head to Exhaust Headpipe Gasket, 1 piece, replacing OEM #18291-MM5-860. Exceptionally broad fitment...
Honda CB750C CB750K CB750L exhaust manifold stud 90035-425-000

1979-82 Honda CB750C / CB750K / CB750L Exhaust Manifold Stud ~ Replaces 90035-425-000

$4.45 USD
73-0988
Replace your exhaust manifold stud with this Exhaust Manifold Stud, 8mm x 55mm, replacing OEM #90035-425-000.Key Features• Exhaust manifold stud• 8mm x 55mm• Replaces...
Honda CB750K CB750L CB650 exhaust joint gasket for headpipe 18391-425-000

1979-82 Honda CB750K / CB750L / CB650 Exhaust Joint Gasket for Headpipe ~ Replaces 18391-425-000

$9.95 USD
17-4506
Replace your DOHC CB750 or 1979 CB650 exhaust joint gasket with this Exhaust Joint Gasket for Headpipe, replacing OEM #18391-425-000 / #18391-MJ4-000.Key Features• Exhaust...
Comparer

1979 Honda CB750L Limited · Exhaust Gaskets & Studs Buying guide

Count seals and studs by the joint being opened

The port gasket is sold as one piece. The headpipe joint gasket has its own references, and the manifold stud is specified at 8 x 55mm for the documented application.

Parts to consider

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-MM5-860 Cylinder-head port gasketOne piece, referencing 18291-MM5-860; order the required quantity.Voir la pièce 1979-82 Honda CB750K / CB750L / CB650 Exhaust Joint Gasket for Headpipe ~ Replaces 18391-425-000 Separate headpipe joint sealReplaces references 18391-425-000 and 18391-MJ4-000.Voir la pièce

Pièces connexes : 8 x 55mm manifold stud

Order quantities from the repair plan

The individual port-gasket product covers one connection. Count only the connections being serviced, and review whether an engine gasket set already supplies the same pieces. Keep the separate pipe-joint seals on their own line in the order.

Do not substitute hardware by appearance

Confirm the stated stud dimensions and existing mounting arrangement. A damaged thread or altered exhaust mount requires assessment before ordering standard replacement hardware. Follow the service manual for assembly and tightening rather than using a generic fastener procedure.

Buying questions

How many port gaskets are in the featured product?

One. Count the cylinder-head-to-headpipe connections being serviced and order the corresponding quantity, after checking whether another gasket package already contains them.

Can a joint gasket replace the cylinder-head port gasket?

Use each part only at its identified joint. Their references and shapes differ, so compare the installed exhaust and removed gasket before ordering.

Does a new stud fix a damaged cylinder-head thread?

A replacement stud does not establish that the receiving thread is sound. Have damaged mounting threads assessed before planning the correct hardware repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB750L

Votre panier

×