VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB750K — Couvercles moteur et accessoires

The cover choices highlighted here are the chrome spark advancer cover, its separately listed gasket and the three-screw set. For a 1981 Honda CB750K, identify the cover being repaired and compare the installed part before combining these separate purchases.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Couvercles moteur et accessoires

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 spark advancer cover gasket 30372-425-000

Honda CB1100 / CB1000 / CB900 / CB750 Spark Advancer Cover Gasket ~ Replaces 30372-425-000

$7.95 USD
18-7059
Replace your DOHC CB's spark advancer cover gasket with this Spark Advancer Cover Gasket (rubber O-ring), replacing OEM #30372-425-000.Key Features• Spark advancer cover gasket...
Honda CB1000 CB900 CB750 spark advancer cover screw set 93700-06025-0A

Honda CB1000 / CB900 / CB750 Spark Advancer Cover Screw Set ~ Replaces 93700-06025-0A

$3.50 USD
73-0900
Replace your spark advancer cover screws with this Spark Advancer Cover Screw Set of 3 in 6x25 size, replacing OEM #93700-06025-0A.Note: the 1980 bikes...
Épuisé
Honda CB valve tappet cover rocker cap 12361-300-000

Honda CB Valve Tappet Cover / Rocker Cap ~ Replaces 12361-300-000

$6.95 USD
01-9980
Dress up your Honda's top end with this Valve Tappet Cover (Rocker Cap), an aftermarket finned chrome-plated replacement for OEM #12361-300-000. Fits an exceptionally...
Honda CB1100 CB1000 CB900 CB750 starter motor cover gasket 31282-425-300

Honda CB1100 / CB1000 / CB900 / CB750 Starter Motor Cover Gasket ~ Replaces Honda OEM 31282-425-300

$11.69 USD
18-7070
Starter Motor Cover Gasket ~ Replaces Honda OEM 31282-425-300 for the Honda CB models listed below. Use this part for repair, restoration, or replacement...
Honda CB1000 CB900 CB750 chrome spark advancer cover 30371-425-010

Honda CB1000 / CB900 / CB750 Chrome Spark Advancer Cover ~ Replaces 30371-425-010

$64.95 USD
73-0050
Replace a worn spark advancer cover with this Chrome Spark Advancer Cover, replacing OEM #30371-425-010. These covers are often dented, rusted, or worn; a...
Comparer

1981 Honda CB750K · Engine Covers & Accessories Buying guide

Put together the spark advancer cover parts list

The chrome cover listing states that its gasket is sold separately. The gasket is described as a rubber O-ring, and the screw set lists three screws for the relevant cover application.

Parts to consider

Honda CB1000 / CB900 / CB750 Chrome Spark Advancer Cover ~ Replaces 30371-425-010 Chrome spark advancer coverA chrome cover listed against Honda reference 30371-425-010. Its product description explicitly says the gasket is sold separately.Voir la pièce Honda CB1100 / CB1000 / CB900 / CB750 Spark Advancer Cover Gasket ~ Replaces 30372-425-000 Spark advancer cover O-ringThe gasket listing describes a rubber O-ring replacing Honda reference 30372-425-000. Check it alongside the cover rather than assuming it is supplied.Voir la pièce Honda CB1000 / CB900 / CB750 Spark Advancer Cover Screw Set ~ Replaces 93700-06025-0A Three-piece spark advancer screw setThree 6 x 25mm screws listed for the 1981 CB750K cover application. Compare the hardware already present before adding the set.Voir la pièce

A replacement cover is only part of the order

The chrome cover, its rubber O-ring and its screw set are separate listings. Inspect the old cover and fastening hardware, then decide which pieces require replacement. The cover’s stated exclusion makes the O-ring an explicit check rather than something to assume from the product photograph.

Confirm the cover identity on a modified engine

Several cover and cap names can appear together in this category. Use the actual location, removed component and listed replacement reference to identify the part. If the installed cover differs from the photographed one, provide photographs before ordering a finish change or replacement hardware.

Common questions

Is the O-ring included with the chrome cover?

No. The chrome spark advancer cover description states that the gasket is sold separately. The corresponding gasket listing describes a rubber O-ring. Add it according to the inspected sealing part rather than assuming the cover package includes it.

How many screws are in the featured set?

The product description lists three 6 x 25mm screws for the 1981–82 CB750K application. Compare that defined package with the cover hardware on your motorcycle; it is not a general engine-cover screw assortment.

How should I identify a cover on a modified engine?

Compare the product’s purpose, replacement reference and photograph with the installed cover. Record where it fits on the engine and provide photographs if the component differs from the listing. Fitment help can review those details before you choose the cover or its hardware.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB750K

Votre panier

×