VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB750K — Guidon et commandes

The handlebar choices listed for this 1981 CB750K are two rubber grip designs. Both descriptions state a 130mm length and 7/8-inch bar application, but their ends differ. Compare the fitted controls and bar-end equipment before choosing the design for your motorcycle.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1981 Honda CB750K · Handlebar Buying guide

Choose the grip design around the controls you retain

The current choices are closed-end grips and open-end grips with plugs. Check each product’s dimensions and end construction against the fitted controls, then use its contents list to plan the grip order.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Black closed-end grip designRubber grips listed for 7/8-inch bars at 130mm length. Their description identifies closed ends.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Black open-end grips with plugsOpen-end rubber grips with plugs included, also listed at 130mm for 7/8-inch handlebars.Voir la pièce

Keep the current control arrangement in the comparison

Grip size should be checked against the handlebar and controls fitted to the motorcycle, not just the year on the model list. Compare the stated length and bar application, and identify whether the throttle or other control equipment has been changed before choosing the rubber parts.

Treat the bar-end choice as a separate detail

The open-end product includes plugs, while the closed-end product has a different end construction. Compare those forms with the equipment you intend to retain. Their shared replacement references do not establish that both designs suit every bar-end accessory or altered handlebar arrangement.

Common questions

Are replacement handlebars or clamps listed here?

The current selection consists of the two rubber grip products. No replacement handlebar or clamp is listed here for this model. Check the component you need against the product description before assuming a grip purchase supplies other handlebar equipment.

Are the plugs included with the open-end grip choice?

Yes. The open-end product description specifically includes end plugs. The closed-end product has a different end design. Compare that difference with the bar-end equipment you intend to retain before selecting the grip style.

Do the model-listed grips settle compatibility with changed controls?

The descriptions give a 130mm length and 7/8-inch bar application. Compare those specifications with the fitted throttle and handlebar arrangement. A model listing cannot identify every control or bar change made to an individual motorcycle.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB750K

Votre panier

×