VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB750F — Pistons et segments

This selection gives the 1981 CB750F owner a standard piston kit, separate standard and oversize rings, and piston-pin clips. Decide from the piston and cylinder measurements already established for the repair, then count the packages required for each piston.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pistons et segments

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

$1.95 USD
05-7201
Secure your piston pins with this 2-pack of 15mm Piston Pin Clips, Japanese made to superior quality and replacing OEM Ref. #94601-15000. Exceptionally broad...
Épuisé
Honda CB750 standard piston ring set 13011-425-004

1979-83 Honda CB750 Piston Ring Set ~ Standard Size

$24.95 USD
05-7500
Rebuild your DOHC CB750's top end with this Standard Size Piston Ring Set, Japanese made to superior quality and replacing OEM Ref. #13011-425-004. Matched...
Honda CB750 DOHC 1ST oversize piston ring set +0.25mm 13021-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm

$24.95 USD
05-7501
Run a 0.25mm oversize on your DOHC CB750 with this 1st Oversize Piston Ring Set (+0.25mm), Japanese made to superior quality and replacing OEM...
Honda CB750 DOHC 2ND oversize piston ring set +0.50mm 13031-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 2nd Oversize +0.50mm

$24.95 USD
05-7502
Rebuild your DOHC CB750 at 0.50mm oversize with this 2nd Oversize Piston Ring Set (+0.50mm), Japanese made to superior quality and replacing OEM Ref....
Honda CB750K CB750C CB750F 62mm std piston kit w rings and pin 13101-425-000

Standard Size (62mm) Piston Kit (07-0184)

$69.95 USD
07-0184
Upgrade or rebuild your classic Honda motorcycle engine with this Standard Size (62mm) Piston Kit — complete with piston, piston rings, piston pin, and...
Comparer

1981 Honda CB750F · Pistons & Rings Buying guide

Choose piston packages from the measured engine

A complete standard piston kit and a ring-only set solve different buying needs. Standard, first-oversize and second-oversize rings are separate choices, with one-piston quantities stated in the ring listings.

Parts to consider

Standard Size (62mm) Piston Kit (07-0184) Standard 62mm piston kitCurrent product description specifies a 62mm piston with rings, pin and a pair of clips. One kit supplies one piston; four kits supply all four.Voir la pièce 1979-83 Honda CB750 Piston Ring Set ~ Standard Size Standard piston ring setRing-only set referencing 13011-425-004, supplied for one piston. Order four sets when replacing rings on all four pistons.Voir la pièce 1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm First-oversize ring setSeparate +0.25mm ring choice referencing 13021-425-004. Each set supplies one piston and needs the corresponding measured piston application.Voir la pièce

Pièces connexes : Second-oversize +0.50mm rings · 15mm pin clips, pack of two

Select size before selecting quantity

The standard piston kit is currently described as 62mm, while the ring choices are standard, +0.25mm and +0.50mm. Those are purchasing choices, not instructions to change the cylinder size. Use the measured piston and cylinder condition from your repair assessment before deciding which listing belongs in the order.

Keep complete kits and loose clips distinct

The standard kit includes a piston, rings, pin and two clips for one piston. Separate 15mm pin clips are sold in a pack of two. Check what comes with the chosen piston package before adding loose clips, and keep any ring-only purchase separate from a complete piston replacement.

Common questions

Does one ring set cover the whole engine?

Each of the standard, +0.25mm and +0.50mm listings supplies rings for one piston. Their descriptions specify four sets for all four pistons. Count the pistons being serviced before entering the order quantity.

What comes in the standard piston kit?

The current description lists one standard 62mm piston, its rings, a piston pin and a pair of pin clips. It is a one-piston kit, with four kits specified for replacing all four pistons.

Can oversize rings be chosen to compensate for wear?

Choose the ring size to match the measured piston and the cylinder repair being performed. The two oversize listings are +0.25mm and +0.50mm alternatives; their presence does not establish which size a worn or previously rebuilt engine requires.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB750F

Votre panier

×