VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB750F — Moteur

The 1981 CB750F engine selection spans paper oil filters, DOHC gasket sets, valve shims, piston parts and separate cam-drive components. Start with the work you are planning, then separate service consumables from the parts needed after dismantling the engine.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 high performance kibblewhite black diamond exhaust valve 14721-422-000

1979-83 Honda CB750 High Performance Kibblewhite Black Diamond Exhaust Valve ~ Replaces 14721-422-000

$54.95 USD
12-0089
Upgrade your DOHC CB750's exhaust with this Kibblewhite Black Diamond Exhaust Valve, replacing OEM #14721-422-000. Same Black Diamond process: stainless steel with special German...
Honda CB750 high performance kibblewhite black diamond intake valve 14711-422-000

1979-83 Honda CB750 High Performance Kibblewhite Black Diamond Intake Valve ~ Replaces 14711-422-000

$54.95 USD
12-0088
Upgrade your DOHC CB750's intake with this Kibblewhite Black Diamond Intake Valve, replacing OEM #14711-422-000 / #14711-MA4-770. Same Black Diamond process as our other...
Épuisé
Honda CB900 CB750 cylinder sleeve o-ring gasket 91302-425-000

1979-83 Honda CB900 / CB750 Cylinder Sleeve O-Ring Gasket ~ Replaces 91302-425-000

$4.61 USD
18-7067
Replace your DOHC CB's cylinder sleeve O-rings with this Cylinder Sleeve O-Rings Set of 4, replacing OEM #91302-425-000. Four pieces required per engine.Key Features•...
Honda CB750 CB900 CB1100 valve stem seal 12209-422-005

Honda CB750 / CB900 / CB1100 Valve Stem Seal

$10.95 USD
01-0135
Service your late-model CB's top end with this Valve Stem Seal, replacing OEM Ref. #12209-422-005 and made in Japan. Fits a wide range of...
Comparer

1981 Honda CB750F · Engine Buying guide

Build a parts list for the engine work ahead

Start with the repair you have identified: oil service, gasket work, valve-shim selection or a more extensive rebuild. Compare the actual contents of each selected product before combining purchases across these jobs.

Parts to consider

1979-83 Honda CB750 DOHC Athena Overhaul Gasket Set Athena overhaul gasket setDOHC CB750 gasket bundle with listed cover, head and base gaskets, valve-stem seals and cylinder-sleeve O-rings. Compare its itemized contents with your repair.Voir la pièce Honda CB1100 / CB1000 / CB900 / CB750 Valve Shim Kit Valve shim assortmentTwenty 25mm-diameter shims in a plastic case, with two of each listed size. Check the assortment against the sizes your measured clearances require.Voir la pièce Honda CB Oil Filter ~ Replaces 15410-426-010 Paper oil filter elementStock-type paper element referencing 15410-426-010 and 15410-422-004. Housing O-rings, spring and washer are separate parts.Voir la pièce

Pièces connexes : Cam chain A, 124 links · 18-tooth front sprocket · Six-piece engine oil-seal kit

Match the purchase to the job

For routine oil service, establish whether the factory-type paper-element housing is still fitted. The chrome spin-on conversion 15-1006 is listed as replacing the housing, filter bolt and paper element. For gasket work, compare the named joints in the overhaul and top-end sets with the scope of your repair.

Treat measurements as buying information

The valvetrain selection includes a shim assortment and individually sold sizes; neither tells you which shim your engine needs. Piston rings also have standard and oversize choices. Keep the old parts, measurements and repair scope together so a convenient bundle does not replace a decision about the actual engine.

Common questions

Do I need separate rings and pin clips with the standard piston kit?

Piston kit 07-0184 lists a piston, rings, pin and a pair of clips for one piston. The separate ring sets supply rings only, and the loose 15mm pin clips come in a two-pack. Check the chosen package before adding duplicate rings or clips.

Does the Athena overhaul set already include exhaust gaskets and the camshaft-holder seal?

Yes. Overhaul set 18-0109 lists a four-piece exhaust-headpipe gasket set and camshaft-holder rubber seal 18-7066. Check those inclusions before adding the same loose parts to a gasket order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB750F

Votre panier

×