VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB750C — Tubes, ressorts, joints et soufflets de fourche

Inspect the fork tubes and identify the seals before ordering for a 1982 CB750C leak repair. The oil-seal set and dust-seal pair are separate products. Compare the fitted front end with the stated dimensions, especially if it was replaced or modified during earlier restoration work.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 fork seals

Honda CB750 / CB650 / CB550 / CB500 Fork Seals

$19.95 USD
27-1007
Replace your fork seals with this Fork Seal Set, 35 x 48 x 10.5 / 11mm. High quality, made in Japan. Key Features• Fork...
Honda CB750 CB650 SL350K2 fork dust seal set

Honda CB750 / CB650 / SL350K2 Fork Dust Seal Set

$24.95 USD
27-1049
Replace your DOHC CB750 or CB650 fork dust seals with this Fork Dust Seal Set of 2. OEM-quality parts made in Japan.Key Features• Fork...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Comparer

1982 Honda CB750C · Fork Oil & Dust Seals Buying guide

Inspect sealing surfaces as well as the rubber

The oil seals are listed at 35 × 48 × 10.5/11mm. The dust seals are separately supplied as two pieces. Choose the repair from the measured fork and condition of its retained sealing surfaces.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 Fork Seals Fork oil sealsFork seal set with listed dimensions 35 × 48 × 10.5/11mm, made in Japan.Voir la pièce Honda CB750 / CB650 / SL350K2 Fork Dust Seal Set Fork dust-seal pairTwo fork dust seals for the listed 1980–82 CB750C application.Voir la pièce

Match the oil seal to the actual fork

The 35 × 48 × 10.5/11mm dimensions define the featured seal set. Compare them with the removed parts and any replacement front-end information. Surface damage or other fork wear needs assessment before a new sealing lip is treated as the whole repair.

Plan dust protection and installation equipment

The dust-seal package contains two pieces and is separate from the oil-seal choice. Inspect the retained dust protection and prepare the correct driver for the fitted fork. Follow the applicable fork-service procedure for dismantling and assembly after the repair scope is established.

Fork Oil & Dust Seals questions

What dimensions identify the oil seals?

35 × 48 × 10.5/11mm. Compare the removed seal and the fork actually fitted, especially after a front-end replacement, before ordering the original-application set.

Are dust seals included with the oil-seal set?

The dust seals are a separate two-piece product. Inspect both retained seals and add that package when their condition and the planned fork service call for renewal.

Should I order seals before checking the fork tubes?

Inspect the tubes and surrounding assembly first. Damaged sealing surfaces can affect the repair, so choose parts for the measured fork and address the condition found during that inspection.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB750C

Votre panier

×