VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB750C — Pistons et segments

Piston ring choice on a 1980 CB750C depends on the engine in front of you, including any previous rebore. The available standard, first-oversize and second-oversize sets cover one piston each. Confirm measurements before ordering a complete engine quantity.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pistons et segments

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

$1.95 USD
05-7201
Secure your piston pins with this 2-pack of 15mm Piston Pin Clips, Japanese made to superior quality and replacing OEM Ref. #94601-15000. Exceptionally broad...
Épuisé
Honda CB750 standard piston ring set 13011-425-004

1979-83 Honda CB750 Piston Ring Set ~ Standard Size

$24.95 USD
05-7500
Rebuild your DOHC CB750's top end with this Standard Size Piston Ring Set, Japanese made to superior quality and replacing OEM Ref. #13011-425-004. Matched...
Honda CB750 DOHC 1ST oversize piston ring set +0.25mm 13021-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm

$24.95 USD
05-7501
Run a 0.25mm oversize on your DOHC CB750 with this 1st Oversize Piston Ring Set (+0.25mm), Japanese made to superior quality and replacing OEM...
Honda CB750 DOHC 2ND oversize piston ring set +0.50mm 13031-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 2nd Oversize +0.50mm

$24.95 USD
05-7502
Rebuild your DOHC CB750 at 0.50mm oversize with this 2nd Oversize Piston Ring Set (+0.50mm), Japanese made to superior quality and replacing OEM Ref....
Honda CB750K CB750C CB750F 62mm std piston kit w rings and pin 13101-425-000

Standard Size (62mm) Piston Kit (07-0184)

$69.95 USD
07-0184
Upgrade or rebuild your classic Honda motorcycle engine with this Standard Size (62mm) Piston Kit — complete with piston, piston rings, piston pin, and...
Comparer

1980 Honda CB750C · Piston Rings Buying guide

Match the rings to the measured bore

Standard, +0.25mm and +0.50mm sets are separate sizes. The model year identifies the application; it does not establish whether a forty-year-old engine still has standard pistons.

Parts to consider

1979-83 Honda CB750 Piston Ring Set ~ Standard Size Standard piston ring setRings for one piston. Four sets are required to renew all four pistons.Voir la pièce 1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm +0.25mm piston ring setFirst-oversize rings for one piston. Four sets are needed for all four pistons.Voir la pièce 1979-83 Honda CB750 DOHC Piston Ring Set ~ 2nd Oversize +0.50mm +0.50mm piston ring setSecond-oversize rings for one piston. Match the serviced bore and piston size.Voir la pièce

Choose size before quantity

The standard set uses reference 13011-425-004, the +0.25mm set 13021-425-004, and the +0.50mm set 13031-425-004. Those choices correspond to different piston sizes. Have bore condition and clearance assessed before committing to a size.

Count by piston

Each ring set supplies rings for one piston, so a four-piston rebuild needs four sets of the appropriate size. A two-pack of 15mm piston-pin clips is a separate retaining-hardware product, not an additional ring set.

Piston Rings questions

Does standard mean my engine needs standard rings?

No. A previously rebuilt engine may have oversize pistons. Verify the existing piston identification and measured bore before selecting standard, +0.25mm or +0.50mm rings.

How many ring sets cover four pistons?

Four sets. Each of the featured ring products is specified for one piston, so one set is not a complete four-cylinder engine package.

Can larger rings compensate for a worn standard bore?

Do not choose oversize rings as a shortcut. Have the bore and piston combination measured, then use rings matched to the resulting engine specification and service-manual checks.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB750C

Votre panier

×