VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB175K7 Super Sport — pièces de moto

The fork service choices for a 1973 Honda CB175K7 include cap bolts with O-rings and a dimensioned seal set. Identify the fork currently installed before using either application, particularly if the motorcycle has received replacement tubes or a complete front end.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD
29-6014
This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...
Honda CB200TK CB175K fork seals

1969-76 Honda CB200TK / CB175K Fork Seals

$18.76 USD
27-1001
Replace your CB175 or CB200T fork seals with this Fork Seal Set, 31 x 43 x 10mm. Made in Japan by OEM supplier.Key Features•...
Comparer

1973 Honda CB175K7 · Fork Caps & Seals Buying guide

Check the fork top and seal dimensions

The cap thread and seal dimensions identify different parts of the repair. Compare both with the fitted fork rather than assuming that a model label confirms the components in a changed front end.

Parts to consider

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461 Fork cap bolt with O-ringAftermarket cap with a 27 × 1.0mm thread, 17mm hex and matching O-ring. Sold individually.Voir la pièce

Pièces connexes : 31 × 43 × 10mm fork seal set

Check the cap as a complete replacement

The aftermarket cap replaces 94605-27101, with cross-references 90123-074-000 and 94605-27100. Each cap includes its O-ring and specifies a 27 × 1.0mm thread with a 17mm hex. Compare the fitted fork before ordering, particularly after a front-end swap.

Choose seals for the fitted fork

The related seals measure 31 × 43 × 10mm and are made in Japan by an OEM supplier. Match all three dimensions to the fork being serviced. Their supplier description does not identify them as genuine Honda-packaged parts.

Questions before buying

Does buying one cap cover both fork tops?

No. Each cap is sold individually with its matching O-ring. Count the caps needing replacement; one cap purchase supplies one fork-top component, not a pair.

Is the fork seal set genuine Honda or an OEM-supplier product?

The seals are made in Japan by an OEM supplier and measure 31 × 43 × 10mm. They are not described as genuine Honda-packaged parts; choose them as the specified supplier-made seal set.

What if the bike has a different front end?

Identify that fork assembly and compare its cap threads and seal dimensions directly. The CB175K7 catalog application is not sufficient evidence for parts on a swapped front end.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB175K7

Votre panier

×