VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB175K3 Super Sport — pièces de moto

Plan engine purchases for your 1969 Honda CB175K3 around the actual job: sealing a leak, servicing the cylinder head, or preparing for an oil change. The magnetic drain plug below has specific thread and clearance measurements to check before ordering.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB200 CB175 clutch arm seal 14 x 24 x 5 91202-KFL-841

Honda CB750 / CB200 / CB175 Clutch Arm Seal ~ 14 x 24 x 5 ~ Replaces 91202-KFL-841

$4.95 USD
73-0958
Replace your clutch arm seal (sb type) with this Clutch Arm Seal (SB Type), 14 x 24 x 5, replacing OEM #91202-KFL-841. High-quality, made...
Honda CB175 CB200 intake valve 14711-235-010

Honda CB175 / CB200 Intake Valve ~ Replaces 14711-235-010

$19.95 USD
01-9955
Restore proper engine performance with this Intake Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Nouveau
Épuisé
Honda CB500 CB450 joker machine magnetic oil drain plug 90013-312-000

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000

$64.95 USD
12-0108
Catch engine debris between oil changes with this Joker Machine Magnetic Oil Drain Plug with O-ring, replacing OEM #90013-312-000. High-quality 6061 billet aluminum body...
Honda CB175 CB200 exhaust valve 14721-302-010

Honda CB175 / CB200 Exhaust Valve ~ Replaces 14721-302-010

$19.95 USD
01-9956
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB175K Athena overhaul gasket set

1969-73 Honda CB175K Athena Overhaul Gasket Set

$89.95 USD
18-0381
Rebuild your CB175K engine with this Athena Overhaul Engine Gasket Set. Athena of Italy is an original-equipment supplier to Yamaha, Honda, Kawasaki, Suzuki, and...
Comparer

1969 Honda CB175K3 · Engine Buying guide

Start with the engine job and the parts removed

An engine parts list is easier to get right when each repair has its own measurements. For drain-plug replacement, match the case opening and sealing arrangement before considering the magnet or finish.

Parts to consider

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000 Joker Machine Magnetic Drain PlugAluminum plug supplied with an O-ring. M33.7 × 1.5 thread, 45 mm outside diameter and 19 mm projection from the case.Voir la pièce

Match the plug to the case

The Joker Machine plug combines a 6061 aluminum body, rare-earth magnet and O-ring. Its thread is M33.7 × 1.5. Compare the threaded opening and sealing surface before ordering, especially if the engine cases or existing plug have been changed.

Keep rebuild purchases job-specific

Head work, leak repair and routine oil service involve different checks. Compare valves, seals and gasket requirements with the parts being removed and the applicable Honda service information. An overhaul gasket-set name alone does not establish every seal or small component supplied.

Engine questions

What comes with the magnetic drain plug?

The plug includes an O-ring. Its aluminum body carries a rare-earth magnet to collect steel debris; no additional engine-service parts are identified as included.

What if my engine has replacement cases?

Match the actual opening to the M33.7 × 1.5 thread and check the sealing surface. Confirm room for the 45 mm diameter and 19 mm projection before ordering.

Can I order an overhaul gasket set without checking its contents?

Check the contents against the joints you plan to open. An overhaul-set description does not establish that every oil seal or small gasket needed for your particular repair is included.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB175K3

Votre panier

×