VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB125S — Freins et embrayage

A control repair begins by locating the wear, rather than ordering every part under the same heading. The hardware for the 1982 Honda CB125S includes a brake rod joint, adjusting nut and clutch pivot set. Compare each with the installed assembly.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Nouveau
Honda CB125S clutch cable

1981-82 Honda CB125S Clutch Cable

$21.46 USD
99-4877
Upgrade or restore your classic Honda motorcycle’s clutch system with this high‑quality Clutch Cable — designed to replace a wide range of OEM part...
Honda CB125S rear friction shoe set 43120-KB9-005

1974-85 Honda CB125S Rear Friction Shoe Set ~ Replaces 43120-KB9-005

$14.95 USD
29-3101
Replace your CB125S rear brake shoes with this Rear Brake Shoe Set, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Rear brake shoe set•...
Honda CB125 CB100 steel clutch plate 22311-107-000

Honda CB125 / CB100 Steel Clutch Plate ~ Replaces 22311-107-000

$7.00 USD
39-1421
Replace your CB100K or CB125S steel clutch plate with this Steel Clutch Plate, replacing OEM #22311-107-000 / #22311-KN4-680.4 pieces required per bike.Key Features• Steel...
Honda CB125 CB100 clutch friction plate 22201-166-000

Honda CB125 / CB100 Clutch Friction Plate ~ Replaces 22201-166-000

$9.50 USD
39-1094
Replace your CB100K or CB125S clutch friction plate with this Clutch Friction Plate #2, replacing OEM #22201-166-000.5 pieces required per bike, order the number...
Honda CB125S front friction shoe set 43120-KB9-005

1979-85 Honda CB125S Front Friction Shoe Set ~ Replaces 43120-KB9-005

$15.10 USD
29-3101
Replace your CB125S front brake shoes with this Front Brake Shoe Set of 2, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Front brake...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Comparer

1982 Honda CB125S · Brake & Clutch Hardware Buying guide

Locate the repair at the lever or linkage

Choose the rod joint, the threaded brake adjuster or the clutch pivot fasteners according to the connection needing repair. The linked Joker Machine knob offers a custom alternative to the ordinary adjusting nut.

Parts to consider

Honda CB750/CB700/CB650/CB550 Brake Rod Joint Brake rod jointRod/arm joint replacing reference 95015-32001; compare the existing connection.Voir la pièce Honda CB Brake Rod Adjusting Nut Brake rod adjusting nutAdjuster replacing reference 95015-42000; match the mating rod before ordering.Voir la pièce Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000 Clutch pivot bolt and nutOne bolt and one nut, replacing references 90114-310-000 and 94001-06200-0S.Voir la pièce

Pièces connexes : Joker Machine custom brake adjuster

Make a small-parts order precise

The rod joint replaces reference 95015-32001; the adjusting nut replaces 95015-42000. The linked Joker Machine custom knob also replaces 95015-42000 and combines a knurled edge with a hex feature. Choose the adjuster style after identifying the rod and joint you will retain.

Inspect the clutch pivot as an assembly

The pivot pack contains one bolt and one nut. Its two listed references identify the fasteners, but do not establish compatibility with a replacement lever perch. Compare the shoulder, bracket and lever arrangement, and check the surrounding components before planning a fastener-only repair.

Buying questions

What comes with the clutch pivot set?

One pivot bolt and one nut are supplied. The bolt replaces 90114-310-000 and the nut replaces 94001-06200-0S. Inspect the adjoining lever and bracket before deciding whether the fasteners alone cover the repair.

Which reference belongs to the brake adjuster?

The adjusting nut is listed against 95015-42000; the rod joint uses 95015-32001. Keep these separate when checking removed hardware or discussing the order with the supplier.

What distinguishes the custom brake adjuster?

The linked Joker Machine knob has both knurled and hex features. It is a custom replacement for reference 95015-42000, so compare it with the ordinary adjusting nut rather than the separate rod joint.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB125S

Votre panier

×