VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB125S — Alimentation en carburant

For a fuel-system repair on the 1982 Honda CB125S, first identify the carburetor that is actually fitted. The featured float needle is offered separately, making it a focused purchase when inspection has established that this is the part requiring replacement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Épuisé
Honda CB750 CB650 CB550 CB400 CB125 float needle 16011-382-004

Honda CB Float Needle ~ Replaces 16011-382-004

$8.95 USD
48-5010
Replace your float needle (only) with this Float Needle, replacing OEM #16011-382-004.Key Features• Float needle (only)• Replaces OEM #16011-382-004• Honda part name: Valve Set,...
Honda CB750 CB650 CB550 CB125 carb float 16013-405-004

Honda CB750 / CB650 / CB550 / CB125 Carb Float ~ Replaces 16013-405-004

$27.95 USD
20-6509
Replace your late-'70s CB carb float with this Carb Float with Pin, replacing OEM #16013-405-004 / #16013-393-004 / #16013-KCY-670 / #16013-MN1-671.4 carb floats are...
Honda CB125S float bowl gasket 16010-439-305

1980-82 Honda CB125S Float Bowl Gasket ~ Replaces 16010-439-305

$12.88 USD
48-1823
Replace your CB125S float bowl gasket with this Float Bowl Gasket, made in Japan, replacing OEM #16010-439-305.Key Features• Float bowl gasket• High quality, made...
Comparer

1982 Honda CB125S · Fuel System Buying guide

Identify the carburetor before assembling the order

The float needle replaces reference 16011-382-004. Treat it as one component of the repair and keep a record of any other worn pieces, especially if the carburetor has been replaced during earlier work.

Parts to consider

Honda CB Float Needle ~ Replaces 16011-382-004 Carburetor float needleNeedle-only replacement for reference 16011-382-004, with an explicit 1978–82 CB125S application.Voir la pièce

Start with the source of the fault

Have the fuel-system fault identified before selecting a replacement. The float needle is a specific service item, and an overflowing or poorly running carburetor does not by itself establish which part has failed. Keep the inspection findings with your parts list.

Check a changed carburetor on its own merits

The needle has an explicit 1978–82 CB125S application. That application describes the listed replacement, not every carburetor that may have been installed since. For a replacement carburetor, compare its identity, the old needle and the required replacement reference before ordering.

Buying questions

What should I record if the carburetor has been changed?

Record its identifying markings and retain the old needle for comparison. The motorcycle year alone does not identify an aftermarket or transplanted carburetor, so establish that assembly’s replacement requirement before buying.

Is this a complete carburetor rebuild kit?

This is a float needle only. Build the rest of the order from the inspection findings rather than assuming the needle purchase supplies the other parts needed for a full carburetor overhaul.

Should fuel overflow be treated as proof that the needle needs replacement?

Have the cause assessed before ordering. Overflow is a symptom, and replacing one component without checking the fitted assembly may leave the fault unresolved. Use the diagnosis to determine the parts required.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB125S

Votre panier

×