VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB750K — Pignons et couronnes

Compare front and rear sprockets, retaining plates and mounting hardware for your 1974 Honda CB750K. Check the chain type and tooth counts actually fitted before ordering; previous gearing changes can affect which sprockets and chain length suit your bike.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pignons et couronnes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 rear sprocket washer set 94108-17000

1969-78 Honda CB750 Rear Sprocket Washer Set

$9.50 USD
29-7012
Replace your rear sprocket lock washers with this Rear Sprocket Tongued Lock Washer 2-pack, replacing OEM #94108-17000.Key Features• Rear sprocket tongued lock washer, 2-pack•...
Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Honda CB750K steel front sprocket 18 tooth x 530 23801-300-620

1972-76 Honda CB750K Steel Front Sprocket ~ 18 Tooth X 530 ~ Replaces 23801-300-620

$34.95 USD
23-0401
Replace your SOHC CB750K front sprocket with this Steel Front Sprocket, 18 tooth, for 530 chain setup as came stock. Replaces OEM #23801-300-620.Please count...
Honda CB750A CB750F CB750K steel rear sprocket 48 tooth x 530 type 41201-300-870

1970-76 Honda CB750A / CB750F / CB750K Steel Rear Sprocket ~ 48 Tooth X 530 Type ~ Replaces 41201-300-870

$74.95 USD
22-0303
Replace your SOHC CB750 rear sprocket with this Steel Rear Sprocket with Dust Plate, 48 tooth, for 530 chain setup as came stock. Replaces...
Honda CB750A CB750F CB750K rear sprocket bolt and nut set 90128-341-000

1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000

$13.95 USD
29-7023
Restore your rear sprocket hardware with this Rear Sprocket Stud Bolt (12 x 54) & Nut Set. Set includes 4 stud bolts and 4...
Nouveau
Honda CB750 primary chain tensioner

1969-78 Honda CB750 Primary Chain Tensioner ~ Genuine Honda Brand

$219.95 USD
99-5460
Upgrade or restore your classic Honda motorcycle with this Primary Chain Tensioner — a genuine Honda brand part engineered for correct fit and dependable...
Comparer

1974 Honda CB750K · Sprockets Buying guide

Match sprockets to your existing chain and gearing

Tooth count and chain type matter alongside model fitment. Compare both sprockets and the chain as a system, and check the retaining hardware needed for the front and rear assemblies.

Parts to compare

1972-76 Honda CB750K Steel Front Sprocket ~ 18 Tooth X 530 ~ Replaces 23801-300-620 Steel front sprocket18 teeth for 530 chain. Replaces 23801-300-620.Voir la pièce 1970-76 Honda CB750A / CB750F / CB750K Steel Rear Sprocket ~ 48 Tooth X 530 Type ~ Replaces 41201-300-870 Steel rear sprocket48 teeth for 530 chain, with dust plate. Replaces 41201-300-870.Voir la pièce Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000 Front sprocket lock plate setRetaining plate and two bolts. Replaces plate reference 23811-292-000.Voir la pièce

Pièces connexes : Rear sprocket stud bolts and nuts · Rear sprocket lock washers

Check the whole final drive for wear

A worn chain and worn sprockets should be assessed together rather than treating a new sprocket as a complete repair. Inspect both ends of the final drive and use the service manual’s wear and adjustment guidance. Include the relevant retaining hardware when planning replacement parts.

Confirm dimensions before changing gearing

The featured sprockets are listed as 18-tooth front and 48-tooth rear for 530 chain. A different tooth count changes the gearing arrangement and may affect chain length or available adjustment. Confirm the intended combination and clearances with a competent technician before selecting parts for a modified setup.

Common questions

Which tooth counts are listed for these front and rear sprockets?

The featured front sprocket has 18 teeth and the rear has 48, both for 530 chain. Their listings ask you to count your existing teeth and check chain length. Confirm your fitted setup before choosing these replacements.

Does the front sprocket come with a new retaining plate?

The featured lock plate and its two bolts are listed separately from the sprocket. Check the contents of each selected item and inspect the existing retaining hardware. Do not assume a sprocket listing supplies all mounting parts.

Can I choose a different sprocket just because it fits the model?

Model fitment is only part of the choice. Tooth count, chain type, length and the condition of the complete final drive must also agree. Check the intended gearing combination before ordering for a modified motorcycle.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB750K

Votre panier

×