1974 Honda CB750K — Outils pour moteur, direction et embrayage

Prepare for engine, fork or clutch work on your 1974 Honda CB750K with tools selected for the exact assembly. Compare the listed puller threads, drive fittings and wrench sizes before buying, particularly if the engine, fork caps or oil filter arrangement has changed.

Préciser la sous-catégorie

Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD

Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...

Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD

Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...

1969-78 Honda CB750 SOHC Alternator Rotor Puller

$12.95 USD

Pull your SOHC CB750 alternator rotor with this Alternator Rotor Puller, 20mm x M1.5 right-hand thread, for internal-thread rotors.Key Features• Alternator rotor puller• 20mm...

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD

Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD

Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...

Épuisé

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD

Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD

Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD

Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles. Key Features Aftermarket part Sold as: Each Fitment...

Comparer

1974 Honda CB750K · Engine, Steering & Clutch Tools Buying guide

Choose specialist tools by the component specification

The correct tool depends on the fastener or assembly being serviced. Identify that part first, then compare the listed dimensions and applications rather than assuming every tool in this broad category performs the same task.

Compare these options

1969-78 Honda CB750 SOHC Alternator Rotor Puller

SOHC alternator rotor puller20mm × M1.5 right-hand thread · For internal-thread rotors.Voir la pièce

Clutch center nut tool24mm inside diameter · Used with a 3/8-inch driver.Voir la pièce

24mm fork cap wrenchNon-marring wrench listed for stock 24mm CB750K fork caps.Voir la pièce

Pièces connexes : Premium clutch nut tool · 35/36mm fork seal driver · SOHC engine rebuild stand

Keep dimensions tied to their purpose

A 35mm fork tube and a 24mm cap wrench describe different measurements. Compare the cap’s wrench flats when choosing a cap tool, and the fork and seal dimensions when choosing a seal driver. Refer to the service manual for the procedure and any additional equipment required.

Check changes to the oil filter setup

The tripod oil filter wrench is listed for aftermarket spin-on cartridge filters. It should not be assumed to service the original filter housing. Identify which filter arrangement your engine uses before choosing a wrench, especially after a conversion or engine replacement.

Common questions

How do the two clutch center nut tools differ?

The standard listing gives a 24mm inside diameter and a 3/8-inch driver fitting. The premium listing describes 20mm and 24mm ends with half-inch drive fittings. Compare those specifications and the actual nut before selecting the version.

Will the oil-filter wrench suit a retained paper-element housing?

The tripod wrench is described for aftermarket spin-on cartridge filters and uses a 3/8-inch drive. Identify the filter arrangement actually fitted before ordering it; the model application is not a statement that it services every original housing.

Is the rotor puller suitable for any rotor?

The listing specifies a 20mm × M1.5 right-hand thread for internal-thread SOHC CB750 alternator rotors. A different rotor may need a different puller. Compare the assembly and specifications before use rather than relying on the bike’s frame year alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1974 Honda CB750K

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie