VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB750K — Pipes d’admission, manchons et colliers

Choose intake rubber and support parts for your 1970 Honda CB750K by following the connections on the motorcycle. The early holder set belongs to a different location from the carb-to-airbox boot. A stabilizer bracket is a further option specifically described for an airbox-delete arrangement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pipes d’admission, manchons et colliers

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750F CB750K carb air box rubber boot 17253-341-300

1969-76 Honda CB750F / CB750K Carb Air Box Rubber Boot ~ Replaces 17253-341-300

$14.95 USD
48-0759
Replace your air box rubber boot with this Carburetor to Air Box Rubber Boot, replacing OEM #17253-341-300.Note: 4 boots used per bike, order the...
Honda CB750K carb holder set

1969-70 Honda CB750K Carb Holder Set

$124.95 USD
48-0750
Replace your old CB750K carb holders with this Carb Holder Set of 4.Note: if you require band clamps, these carb holders need our 46-49mm...
Comparer

1970 Honda CB750K · Carb Holders & Boots Buying guide

Follow the connection from engine to carburetor to airbox

Compare the engine-side holders with the separate airbox boots before selecting rubber parts. Then check supplied quantities and clamp requirements, keeping the modified-intake stabilizer separate from a stock airbox service.

Parts worth comparing

1969-70 Honda CB750K Carb Holder Set Four-piece early carb holder setListed for 1969–70 CB750K models. Separate 46–49mm clamps are specified when band clamps are required.Voir la pièce 1969-76 Honda CB750F / CB750K Carb Air Box Rubber Boot ~ Replaces 17253-341-300 Airbox-side rubber bootConnects the carburetor to the airbox. Four boots are used per bike; check how many need replacement.Voir la pièce

Quantities differ between the two rubber products

The early carb holders are a set of four, while the airbox boot listing asks buyers to order the quantity needed and notes four per bike. Compare the connections and existing clamps before buying. A four-piece holder purchase does not automatically supply the airbox-side rubber parts.

Choose support parts for the intended arrangement

The stabilizer bracket is described for pods or other builds that remove the airbox. Review that purpose against your intended intake before adding it. If the motorcycle retains the stock airbox, start with the boots and their connections instead of assuming every support option is needed.

Questions before ordering

Which holder set is listed for the 1970 motorcycle?

The four-piece holder set lists CB750K models from 1969–70. Compare your fitted carburetors and engine-side connections with that description, particularly if the motorcycle has been modified or fitted with a replacement carburetor assembly.

What clamps does the holder listing specify?

It specifies 46–49mm diameter band clamps if clamps are needed, with eight required for the described arrangement. Review the existing clamps and the full product details before ordering; do not assume clamps are part of the four-holder set.

Does the airbox boot replace the stabilizer bracket?

They serve different arrangements. The boot is the rubber connection between carburetor and airbox; the stabilizer is described for supporting carburetors when that airbox has been removed. Select according to the intake actually fitted or planned.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB750K

Votre panier

×