VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB750K — Pièces de bras oscillant

Browse swingarm thrust bushings, felts, dust caps, grease fittings and pivot hardware for the 1969 Honda CB750K. Identify the mounting position before choosing: the rear shock bushing is a separate component from the pieces associated with the swingarm pivot.

Fermer ×
1969 Honda CB750K

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1969 Honda CB750K · Swingarm Parts Buying guide

Separate the pivot parts from the shock mounting bushing

Thrust bushings, felts and dust caps belong to different positions than the rear shock mounting bushing. Compare each product description and supplied quantity with the fitted assembly before planning your swingarm parts order.

Parts to compare

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Bronze thrust bushing setPair of bronze thrust bushings with the listed early CB750K application and replacement reference.Voir la pièce Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000 Swingarm felt setTwo replacement felts described for the swingarm pivot area.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010 Swingarm dust seal capsPair of metal dust seal caps described for the ends of the swingarm pivot.Voir la pièce

Pièces connexes : Pivot bolt locknut and washer · Grease fitting pack · Rear shock mounting bushing

Build the pivot parts order from the separate listings

The bronze thrust bushings, felts, metal caps and grease fittings are separate two-piece products. The pivot locknut and washer are another listing. Compare the actual components requiring service and read the contents before assuming any one product supplies the entire swingarm pivot assembly.

Use the shock bushing dimensions for its own location

The rear shock swingarm bushing description gives 19mm length, 22mm outside diameter and 10mm inside diameter. It describes the connection between the shock and swingarm. Compare those dimensions at that mounting point rather than using the item as a substitute for pivot bushings.

Useful questions before ordering

Does the bronze bushing set include felts or dust caps?

The bronze product describes a set of two thrust bushings. Felts and metal dust caps are separate listings with their own contents. Review the individual products and the components you need before treating the bushing set as a complete kit.

Where does the rear shock swingarm bushing belong?

Its description places it between the rear shock and swingarm and supplies dimensions for comparison. It is distinct from the swingarm pivot thrust bushings. Identify the location and fitted mount before selecting that bushing.

Are the grease fittings supplied individually?

The swingarm grease fitting listing describes a pack of two and provides a replacement reference. Compare the fittings on your motorcycle and the quantity required for your repair before adding a pack to the order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB750K

Votre panier

×