VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB750K — Outils pour fourche et suspension

This selection contains a split fork seal driver and a non-marring fork cap wrench for service planning on the 1969 Honda CB750K. Choose by the actual fork and cap dimensions, since replacement front-end components can change which tool size suits the work.

Fermer ×
1969 Honda CB750K

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour fourche et suspension

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Comparer

1969 Honda CB750K · Fork Service Tools Buying guide

Choose each tool by the dimension it works with

The seal driver is described for 35mm or 36mm forks, while the wrench is for a 24mm fork cap. Those measurements identify different working surfaces and should be checked separately on your fitted front end.

Parts to compare

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36mm split fork seal driverCarbon-steel split-design driver described for 35mm or 36mm conventional or inverted forks.Voir la pièce Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm non-marring fork cap wrenchWrench described for 24mm fork caps, including the listed stock CB750K application.Voir la pièce

Do not confuse tube diameter with the cap wrench size

The driver’s 35/36mm application refers to the forks it works with; the wrench’s 24mm size refers to the cap. Measure the relevant part for each tool, especially if the motorcycle has different fork caps or a replacement front-end assembly.

Plan the full service before buying a single tool

These listings describe two specific fork service tools, not a complete workshop equipment kit. Identify the work being assessed and consult the service manual for the required equipment and procedure. A useful tool match does not replace checking the fork components and service specifications.

Useful questions before ordering

Does the 24mm wrench mean the bike has 24mm fork tubes?

No. The wrench description refers to the fork cap size, while the seal driver lists its own 35/36mm fork application. Compare the cap and fork measurements separately rather than treating the tool sizes as interchangeable specifications.

Can the seal driver be used on inverted forks?

The description states that the split-design driver is suitable for conventional or inverted forks with the stated 35mm or 36mm application. Check the actual fork size and the requirements of the work before choosing it.

Are replacement fork seals included with either tool?

Neither tool listing describes included replacement seals. The driver and wrench are service tools, while the seal sets are separate parts. Check the correct seal dimensions and fork application before building a combined parts and tools order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB750K

Votre panier

×