Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1975 Honda CB400F · Suspension & Wheel Buying guide
335mm is eye-to-clevis on the chrome stock-length set. 321mm is center-of-eye to clevis on the stock-type set. Fork seals are a set, 33 x 46 x 11mm, made in Japan, for the 1975-77 CB400F.
335mm chrome shock setEye-to-clevis 335mm, also printed as 13 3/16 inches. Chrome body, springs, and end cap. 4-position preload. Includes bushings. Names the 1975-77 CB400F.View part
Fork seals, 33 x 46 x 11mmA set, made in Japan. Names the 1975-77 CB400F and the CB360. Dust boots are separate, a set of two, 33mm, replacing 91254-413-881.View part
Front spoke set36 silver spokes and 36 gold nipples for an 18 inch front wheel. Names the 1975-77 CB400F and the CB350F. The rear set is a different part.View part
Related parts: 321mm shock set · Steering nut, 30mm
The 290mm shorty sets do not name the CB400F. A 336mm set is described as a stock match for the CB750K 1972-76. Measure your shock before you treat either one as the 1975 Supersport length.
The 6mm reflector and the headlight stay bolt sit in the fork category and do not seal a fork. The clutch lock nut replacing 90231-KCS-651 is not a fork cap. The fork cap bolt that does name this bike replaces 94605-27101, is sold each, and the text says two are typically required.
No. 335mm is eye-to-clevis. 321mm is center-of-eye to clevis, and that set's top eye is 20mm wide. Measure the old shock the same way.
33 x 46 x 11mm, a set, for the 1975-77 CB400F. Dust boots are 33mm, a set of two.
36 spokes and 36 nipples, for an 18 inch wheel. Front and rear are separate sets, and both name the 1975-77 CB400F.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.