My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Turn Signal Lamps, Stems, Lenses & Reflectors

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...

1973 Honda CB350F0 · Signals & Reflectors Buying guide

Check the lamp pattern and reflector fixing

A replacement gasket must match the lamp and lens it seals. Reflector repairs call for a different check: the threaded fixing and the rubber base beneath the front reflector.

Match the sealing surface

The signal gasket replaces reference 33443-268-671 and serves the matching early-style lamp and lens. Confirm the outline against your existing assembly, especially after a signal conversion. A gasket that suits the model’s original lamp may not suit a later aftermarket housing.

Check the reflector and its support

The screw-on reflector uses a 6mm thread. Its front rubber base is a separate service item with reference 33743-341-670. Inspect the mounting point and rubber condition before deciding whether the reflector, the base or both need replacement.

Signals & Reflectors questions

Will this gasket fit an aftermarket turn signal?

Compare the gasket outline and sealing face with the aftermarket lamp first. This gasket is intended for the matching early-style lamp and lens, so a changed housing should not be selected by motorcycle model alone.

Is the reflector adhesive-backed?

The featured reflector is a screw-on type with a 6mm threaded fixing. Check that your motorcycle still has the corresponding mounting point; it is a different attachment style from stick-on reflectors.

Does the front rubber base come with the reflector?

The reflector and front rubber base are separate products. Inspect both and order the pieces needed for your repair. The base goes beneath the stock front reflector and does not replace the reflector itself.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×