VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda SL350K2 Motosport — pièces de moto

Inspect the fork and rear-shock assemblies before ordering suspension parts for a 1972 Honda SL350K2. The featured replacement shocks, top bridge washers and joint rubbers cover different jobs, with linked fork seals and clips available for a separately identified fork service.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB750 CB550 CB500 CB450 CB400 fork cap o-ring (set 2) 94608-50000

Honda CB Fork Cap O-Ring (Set/2)

$2.95 USD
49-0790
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #94608-50000 (qty 2).Key Features• Fork cap O-rings• Set of...
Honda CB750 CB650 SL350K2 fork dust seal set

Honda CB750 / CB650 / SL350K2 Fork Dust Seal Set

$24.95 USD
27-1049
Replace your DOHC CB750 or CB650 fork dust seals with this Fork Dust Seal Set of 2. OEM-quality parts made in Japan.Key Features• Fork...
Honda CB750 CB550 front fork top bridge triple tree washer kit 53235-300-000

Honda CB Front Fork Top Bridge / Triple Tree Washer Kit ~ Replaces 53235-300-000

$12.50 USD
73-0833
Avoid broken triple trees with this Front Fork Top Bridge / Triple Tree Washer Kit of 2 washers. These washers are needed in order...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB550 CB500 CB450 CL450K5 fork internal circlip set 94521-48000

Honda CB Fork Internal Circlip Set

$7.95 USD
73-1035
Replace your fork internal circlips with this Fork Internal Circlip (48mm) Set of 2, replacing OEM #94521-48000.Key Features• Fork internal circlips• 48mm• Set of...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Honda CB750 CB550 black steering stem nut joker machine 90304-415-000

Honda CB Black Steering Stem Nut ~ Joker Machine ~ Replaces 90304-415-000

$47.95 USD
12-0073
Dress up your steering stem with this Joker Machine Black Steering Stem Nut, 30mm hex, replacing OEM #90304-415-000. High-quality CNC-machined and made in the...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1972 Honda SL350K2 · Suspension & Wheel Buying guide

Identify the fitted suspension before choosing service parts

The 335 mm shock set has explicit SL350 application and an eye-to-clevis mounting layout. Front-end washers, fork-cap seals and internal clips need their own position and shape checks, particularly where the fork assembly has been changed.

Parts to consider

Honda CB Stock Length Shock Absorber Set ~ Black 335mm Black 335 mm shock set335 mm eye-to-clevis replacement set with four preload positions, bushings, inserts, washers and preload wrench.Voir la pièce Honda CB Front Fork Top Bridge / Triple Tree Washer Kit ~ Replaces 53235-300-000 Top bridge washer pairTwo washers replacing reference 53235-300-000.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubber pairTwo mounting rubbers replacing reference 52484-292-000.Voir la pièce

Pièces connexes : Japanese-made fork dust seal pair · 48 mm fork circlip pair · Fork-cap O-rings, pair

Keep fork measurements tied to the correct part

The linked dust-seal set contains two Japanese-made seals; the internal clip set supplies two 48 mm clips, reference 94521-48000. That clip dimension is not a fork tube diameter. The linked fork-cap O-ring set separately supplies two O-rings, reference 94608-50000, for the cap sealing location.

Inspect shock attachments before choosing replacements

The featured 335 mm eye-to-clevis shocks include bushings, inserts, washers and a preload wrench, with four preload positions. Compare the fitted attachment dimensions and clearances before choosing them. The separate joint-rubber pair is a mounting repair option, rather than proof that the complete shocks need replacement.

Questions before ordering

Does the 48 mm circlip dimension identify the fork tube size?

No. It is the stated size of the replacement internal circlip. Identify the fork assembly and retaining arrangement separately; do not use that number as a substitute for the fork’s own dimensions.

Do the fork parts cover a changed front end automatically?

No. A replacement front end must be identified in its own right. Compare the existing dust seals and retaining clips with the selected products rather than relying only on the motorcycle’s model-year selection.

Can I treat the 335 mm shock label as the original K2 specification?

Choose a shock only after verifying the required length and both mounting ends for the fitted motorcycle. A replacement product’s dimension and broad stock-length description alone do not establish an original K2 suspension specification.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda SL350K2

Votre panier

×