VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda SL350K2 Motosport — pièces de moto

Small mounting parts deserve a close look before replacing larger body pieces. On a 1972 Honda SL350K2, compare the rubber shapes at the covers, rear tank support and headlight, then check separate seat and stand hardware for the repair at hand.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Cadre et carrosserie

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB sidecover damper rubber b 83551-300-000

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000

$2.54 USD
02-6531
Keep your sidecovers snug and rattle-free with this Rubber Sidecover Damper B, a direct replacement for OEM #83551-300-000. Fits an exceptionally broad range of...
Honda CB750 CB650 CB550 side stand pivot bolt and nut set 90108-283-000

Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000

$4.61 USD
73-0893
Replace your side stand pivot hardware with this Side Stand Pivot Bolt & Nut Set, used to fasten the side stand in place. Replaces...
Honda CB sidecover damper rubber a 17247-303-000

Honda CB Sidecover Damper Rubber A ~ Replaces 17247-303-000

$2.54 USD
02-6532
Complete your sidecover damper refresh with this Rubber Sidecover Damper A, a direct replacement for OEM #17247-303-000. This is one of the 3 different...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB750 CB550 CB500 CB350 SL350K1 seat hinge pin 77103-313-000

Honda CB Seat Hinge Pin ~ Replaces 77103-313-000

$4.50 USD
73-0947
Replace your seat hinge pin with this Seat Hinge Pin, replacing OEM #77103-313-000.Note: 2 used per bike, order the quantity you require.Key Features• Seat...
Honda CB1000 CB750 kick starter stopper spring w steel ball 28333-300-000

Honda CB Kick Starter Stopper Spring with Steel Ball ~ Replaces 28333-300-000

$3.95 USD
29-7013
Restore your kick starter stopper with this Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM #28333-300-000 (spring) and OEM #96211-08000 (steel ball).Key...
Nouveau
Honda CB750 CB650 CB550 SL350K2 Honda headlight stay rubber cushion 61315-340-000

Honda CB750 / CB650 / CB550 / SL350K2 Genuine Honda 61315-340-000 Headlight Stay Rubber Cushion

$15.95 USD
99-5368
This genuine Honda headlight stay rubber cushion fits the upper headlight and fork ear mounting area on select classic Honda CB and SL models....
Comparer

1972 Honda SL350K2 · Frame & Body Buying guide

Find the mounting point that needs attention

The current selection concentrates on dampers, cushions and small hardware. Sort the job by location so a similar-looking rubber or pin is not chosen for a different mounting point.

Parts to consider

Honda CB Sidecover Damper Rubber A ~ Replaces 17247-303-000 Type A sidecover damperIndividual sidecover damper replacing reference 17247-303-000.Voir la pièce Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000 Rear tank support rubberRear fuel-tank cushion with replacement reference 17613-286-000.Voir la pièce

Pièces connexes : Type B sidecover damper · Seat hinge pin · Genuine Honda headlight stay cushion

Order rubbers by position and shape

Type A and Type B sidecover dampers use different references and are sold individually. Lay out the worn pieces by their mounting positions before deciding how many of each to order. The larger-model quantity tables do not establish the count for your SL350 installation.

Inspect the metal mounting parts alongside the rubber

A cushion choice depends on the bracket or tab it supports. Compare changed headlight ears and tank supports with the original arrangement, and inspect seat hinge and stand pivot hardware separately. Fresh rubber cannot establish that an altered mounting assembly is otherwise correct.

Questions before ordering

Can I replace all sidecover rubbers with one damper type?

Choose Type A or Type B for each actual mounting shape. They have different replacement references, and their presence in the same collection does not make them substitutes for one another at every position.

Will the rear tank rubber work with an aftermarket tank?

Compare the rear mounting tab, support shape and reference 17613-286-000 with the tank arrangement on the bike. A replacement tank may use a different support even when it sits on the same frame.

What if the headlight ears or fork covers have been changed?

Compare the cushion’s shape and seating points with the fitted ears and covers. Use reference 61315-340-000 to identify the replacement, but verify the changed mounting arrangement before ordering.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda SL350K2

Votre panier

×