VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CL360K1 Scrambler — pièces de moto

Choose signal mounting parts for your 1975 Honda CL360K1 by reach and attachment, not chrome finish alone. Front and extended rear stays have different dimensions. Lens-gasket matching and the reflector’s screw thread need their own checks when older lights have been replaced.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1975 Honda CL360K1 · Signals & Reflectors Buying guide

Match signal reach before replacing the mounting pieces

The useful comparisons are the existing stay’s measured sections, the lamp being retained and the reflector attachment. Keep front and rear choices separate rather than assuming similar stems are interchangeable.

Parts to consider

Honda CB Front Turn Signal Stay Chrome front signal stay65mm body and 25mm threaded section, for a 90mm total length.Voir la pièce Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000 Extended rear signal stayChrome rear stay measuring 125mm; an extended-length option.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type reflector with a 6mm thread; replacement reference 33741-340-670.Voir la pièce

Pièces connexes : Signal-lamp gasket

Compare dimensions from the same starting points

The front stay’s 90mm total includes a 25mm threaded section; its body is 65mm. Use those separate measurements when comparing a removed stay. The rear choice is described as an extended 125mm stay, so choose it for the required reach rather than assuming an original length.

Keep gasket matching tied to the lamp housing

The related gasket replaces 33443-268-671 and pairs with merchant lens 11-2110 and lamp 11-2122. Compare the retained lamp housing before selecting it after a signal swap. Check the reflector separately: its screw-on fitting has a 6 mm thread.

Common buying questions

Is the front stay 65mm or 90mm long?

Both describe it: 65mm is the body and 25mm is the threaded section, giving 90mm overall. Compare like-for-like measurements so a visible stem length is not mistaken for the complete part.

Should I choose the 125mm rear stay for an original-length restoration?

It is an extended-length option. Measure the stay and arrangement you intend to retain, and verify the required restoration dimensions before ordering; its broad model application does not establish the original reach on your motorcycle.

Will the linked gasket fit aftermarket turn signals?

Do not choose it from motorcycle fitment alone. Match replacement reference 33443-268-671 and the lens/housing arrangement being retained; a different aftermarket signal may use another gasket profile or attachment.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CL360K1

Votre panier

×