VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CL360K1 Scrambler — pièces de moto

Suspension service parts for a 1975 Honda CL360K1 include small fittings at the shocks, swingarm pivot and steering stem. Identify the location being repaired before buying. Custom shocks and changed front ends need separate mounting checks rather than an assumed match to original hardware.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB1000 CB900 CB750 CB550 chrome steering stem nut 90304-415-000

Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000

$9.95 USD
49-0786
Replace your steering stem nut with this Chrome Steering Stem Nut, hex nut size 30mm, replacing OEM #90304-415-000.Sold each. We also offer the matching...
Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Honda CB750 CB550 CB500 CB450 CB400 fork cap o-ring (set 2) 94608-50000

Honda CB Fork Cap O-Ring (Set/2)

$2.95 USD
49-0790
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #94608-50000 (qty 2).Key Features• Fork cap O-rings• Set of...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB1000 CB900 CB750 CB550 steering stem washer 90503-283-000

Honda CB Steering Stem Washer ~ Replaces 90503-283-000

$3.50 USD
49-0787
Replace your steering stem washer with this Chrome Steering Stem Washer, replacing OEM #90503-283-000.Sold each, order the quantity you require.Key Features• Chrome steering stem...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD
73-0189
Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1975 Honda CL360K1 · Suspension Hardware Buying guide

Identify the joint before choosing its replacement fittings

Shock joint rubbers, swingarm end caps and steering-stem hardware are different purchases. Use their references and package contents to plan the repair without transferring measurements or quantities between locations.

Parts to consider

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubber setTwo joint rubbers referencing 52484-292-000.Voir la pièce Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000 Chrome steering-stem nutIndividually sold nut with a 30mm hex; replacement reference 90304-415-000.Voir la pièce Honda CB Steering Stem Washer ~ Replaces 90503-283-000 Separate steering-stem washerIndividually sold chrome washer referencing 90503-283-000.Voir la pièce

Pièces connexes : Two-piece swingarm end caps · Fork-cap O-ring set · Swingarm grease fittings

Make a location-by-location service list

The shock joint rubber set and related swingarm dust cap set each contain two pieces, but they address different joints. The related grease fittings and fork-cap O-rings are separate service items. Count the positions you intend to renew rather than treating nearby fittings as a single complete kit.

Match replacement hardware to any suspension changes

Record the maker and model of aftermarket shocks before comparing their mounting rubbers. A changed front end likewise needs its own steering-stem and fork-cap checks. Use the supported hardware references with the fitted assemblies; a motorcycle model label cannot identify parts introduced by an earlier conversion.

Common buying questions

Does the fork-cap O-ring set supply two seals?

Yes. The related fork-cap O-ring set contains two pieces, reference 94608-50000. Compare the fitted fork caps before ordering, particularly after a front-end swap; these O-rings serve a different location from the shock and swingarm rubbers.

Does the steering nut’s 30mm measurement describe its thread?

It is the hex size, useful for identifying the tool required. Match replacement reference 90304-415-000 and the fitted stem separately; the hex measurement should not be used as a thread specification.

What should I check when the swingarm has been replaced?

Identify the swingarm and compare its pivot-end caps with reference 52144-362-000. Check the grease-fitting arrangement separately; the motorcycle’s original application does not establish the dimensions or fittings used by a replacement swingarm.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CL360K1

Votre panier

×