VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CL350K5 Scrambler — pièces de moto

For clutch-nut or alternator-rotor work on a 1973 Honda CL350K5, choose the tool from the fitted component rather than the category name. Check the nut’s working profile and the rotor’s removal thread, then confirm that your driver or extension matches the selected tool.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Nouveau
Honda CB350 CL350K0 CL350K1 CL350K2 alternator rotor puller 16 x 1.5

Honda CB Alternator Rotor Puller ~ 16 x 1.5

$39.95 USD
99-4937
Specialty puller tool for removing the alternator rotor on your CB350/360 without damaging the rotor or crankshaft during the process. A proper rotor puller...
Comparer

1973 Honda CL350K5 · Clutch & Rotor Tools Buying guide

Match the working end before checking the drive size

Two clutch-nut tool formats and one threaded rotor puller are available. Keep the working diameter distinct from the drive size so the selected tool suits both the component and the equipment on your bench.

Parts to consider

Honda CB Clutch Center Nut Removal Tool 24mm clutch-nut tool24mm internal working diameter; accepts a 3/8-inch driver.Voir la pièce Honda CB Clutch Center Nut Removal Tool ~ Premium 20mm / 24mm clutch-nut toolTwo working ends for use with a 1/2-inch drive extension.Voir la pièce Honda CB Alternator Rotor Puller ~ 16 x 1.5 Threaded alternator rotor puller16 × 1.5 thread for the matching rotor removal connection.Voir la pièce

Check working engagement before applying a driver

The tool needs to match the fitted nut before the drive connection becomes useful. Compare the standard 24mm tool with the two-ended 20mm/24mm option and select the format suited to the task. Refer to the correct service procedure for holding and removing the assembly.

Treat rotor identification as part of tool selection

A replaced rotor may not be identified reliably by the motorcycle’s frame year. Verify its removal-thread specification before choosing the puller. If identification is uncertain, obtain a component check rather than trying a guessed thread or treating the tool’s application tag as dimensional proof.

Common buying questions

Does 1/2-inch drive mean the premium tool fits a larger nut?

The drive size describes the extension connection, while this tool’s working ends are 20mm and 24mm. Compare the nut with those working ends separately from checking the driver or extension you own.

Should I buy both clutch-nut tools for one repair?

Establish the required working size and preferred drive arrangement first. The standard tool has a 24mm inside diameter, while the two-ended tool offers 20mm and 24mm ends; choose for the identified task rather than automatically ordering both.

What should I verify if the rotor has been changed?

Identify the fitted rotor and confirm its puller thread with its documentation or supplier. This puller specifies 16 × 1.5, so verify that connection before ordering for an aftermarket or previously replaced rotor.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CL350K5

Votre panier

×