VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CL350K2 Scrambler — pièces de moto

Tank hardware and carburetor internals answer different fuel-service problems on a 1970 Honda CL350K2. Start with the location of the fault, then compare the actual tank and carburetors before selecting a threaded petcock, needle-and-seat assembly or bowl drain screw.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Honda CB550 CB500 CB400 CB350 float bowl gasket

Honda CB550/CB500/CB400/CB350 Float Bowl Gasket

$9.95 USD
20-8032
Replace your CB350F/CB400F or CL350/SL350 float bowl gasket with this Float Bowl Gasket (O-ring).Key Features• Float bowl gasket (O-ring)Fitment / Compatibility• Honda CB350F (1973‑74)...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Honda CB350 CL350K0 CL350K2 CL350K3 float needle and seat 16011-287-004

Honda CB Float Needle & Seat ~ Replaces 16011-287-004

$13.95 USD
48-1519
Replace your CB350 or CL350 float needle and seat with this Float Needle & Seat, made in Japan, replacing OEM #16011-287-004.Key Features• Float needle...
Honda CB350 CL350 slow pilot jet #38 99124-286-0380

1968-73 Honda CB350 / CL350 Slow / Pilot Jet #38 ~ Replaces 99124-286-0380

$7.00 USD
48-1588
Restore clean idle and low-speed fuel metering with this aftermarket Keihin-style slow / pilot jet, size #38. It replaces Honda OEM #99124-286-0380 for select...
Honda CB350 CL350K0 CL350K2 carb holder w gasket 16211-286-040

Honda CB Carb Holder with Gasket ~ Replaces 16211-286-040

$27.03 USD
48-1473
Replace a single CB350 or CL350 carb holder with gasket using this Carb Holder with Gasket, replacing OEM #16211-286-040 (holder) and #16229-369-000 (gasket).Note: this...
Nouveau
Honda CB350K CL350K carb rebuild kit

1970-73 Honda CB350K / CL350K Carb Rebuild Kit

$18.95 USD
48-1393
Rebuild your round-carb-bowl CB350 or CL350 with this Carb Rebuild Kit, designed for carbs with ROUND CARB BOWLS.Note: each kit rebuilds one carb, order...
Nouveau
Honda CB350 CL350K0 CL350K1 CL350K2 CL350K3 carburetor screw kit

Honda CB Carburetor Screw Kit

$17.57 USD
48-0795
Refresh your CB350 or CL350 / SL350 carb screws with this Carburetor Screw Kit. Enough for 2 carbs. Get a new set of screws...
Honda CB350K CB350G CL350K SL350 chrome carburetor top cover 16014-286-000

Honda CB350K / CB350G / CL350K / SL350 Chrome Carburetor Top Cover

$24.95 USD
13-0011
Aftermarket chrome carburetor top cover for the Honda 350 models listed below. It replaces a worn, damaged or missing original carburetor top cover.Product Details...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Épuisé
Honda CB350 CL350K0 CL350K1 carb diaphragm rubber 16022-287-004

Honda CB Carb Diaphragm Rubber ~ Replaces 16022-287-004

$23.45 USD
48-1985
Replace your carburetor top diaphragm rubber with this Carburetor Top Diaphragm Rubber. Outer dimension 72mm, inner dimension 25mm. Replaces the diaphragm rubber on Honda...
Comparer

1970 Honda CL350K2 · Fuel System Buying guide

Follow the fuel path before choosing parts

These three products serve distinct connections. Checking the tank thread, the carburetor’s needle-seat application and the drain-screw seal keeps one symptom from becoming an unnecessarily broad rebuild order.

Parts to consider

Honda CB Fuel Petcock ~ Replaces 16950-292-000 Threaded fuel petcockM16 × 1.5 tank connection; replacement reference 16950-292-000.Voir la pièce Honda CB Float Needle & Seat ~ Replaces 16011-287-004 Float needle and seatJapanese-made needle and seat, with replacement reference 16011-287-004.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Float-bowl drain screwStock-type drain screw with an O-ring, sold individually.Voir la pièce

Pièces connexes : Round-bowl carburetor rebuild kit · Carburetor holder with gasket · Chrome fuel-tank cap

Use the tank connection as the first petcock check

The petcock uses an M16 × 1.5 connection and replaces 16950-292-000. Check the tank thread, clearance and hose routing, especially after a tank swap. If the repair is at the filler instead, the linked chrome cap has a gasket already installed.

Separate bowl sealing from fuel-level components

A drain screw with its O-ring addresses the bowl drain; the needle and seat reference 16011-287-004. For wider service, the linked rebuild kit requires round bowls and covers one carburetor per kit. Identify the fitted carburetors before deciding between a targeted part and the larger order.

Ordering questions

Will the petcock fit a non-original tank?

Only after its connection is confirmed. Compare the tank fitting with the offered M16 × 1.5 thread and check the mounting space and hose routing before relying on the motorcycle application.

Should a leaking bowl automatically get a rebuild kit?

Identify whether the leak is at the drain, bowl seal or another component first. The separate drain screw includes an O-ring, while a broader kit should be chosen only after its application and needed contents are confirmed.

How many rebuild kits should I order?

The linked round-bowl kit rebuilds one carburetor. Confirm that your fitted carburetors have the required round bowls, then order one kit for each carburetor being rebuilt and check any essential kit contents.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CL350K2

Votre panier

×