VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB360T — Clignotants, supports, cabochons et réflecteurs

Signal repairs on the 1975 CB360T may need a mounting stay, a lens gasket or a screw-on reflector. Match the part to its position and existing lamp housing, paying particular attention to stay length on a motorcycle with altered indicators.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1975 Honda CB360T · Signals & Reflectors Buying guide

Match signal hardware by position and size

The front stay and extended rear stay are different lengths. The screw-on reflector uses a 6mm thread, while the lens gasket suits the specified lamp family. Compare these details before replacing a complete assembly.

Parts to consider

Honda CB Front Turn Signal Stay Chrome front signal stay65mm body with a 25mm threaded section; 90mm total length.Voir la pièce Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000 Extended rear signal stayChrome rear stay, 125mm long; compare the required reach before ordering.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type reflector with a 6mm thread, referencing Honda 33741-340-670.Voir la pièce

Pièces connexes : Turn signal lens gasket

Compare the complete stay dimensions

The front stay has a 65mm body and 25mm threaded section for 90mm total length. The featured rear stay is the extended 125mm option. Measure the piece being replaced and check clearance around the lamp, bodywork and mounting point before choosing either.

Keep the housing when the small parts suffice

If the lamp housing remains suitable for use, a replacement gasket or mounting stay may address the repair. The linked gasket references 33443-268-671. Check the housing shape and gasket seating area, particularly where aftermarket indicators have replaced the original arrangement.

Common buying questions

Is the rear stay the same length as the front stay?

No. The featured rear stay is 125mm long, while the front stay is 90mm overall with a 65mm body. Compare the existing mounting position and intended lamp reach before ordering.

Will the reflector fit a plain mounting hole?

This reflector uses a 6mm screw-on thread. Compare the motorcycle’s mounting arrangement and available attachment hardware so you can establish how the threaded reflector will be secured.

Can I use the gasket with any aftermarket indicator?

Choose it by the housing it seals. This gasket references Honda 33443-268-671 and the specified lamp family; a different aftermarket housing needs its own matching seal dimensions.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB360T

Votre panier

×