VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB360K0 — Clignotants, supports, cabochons et réflecteurs

Choose CB360K0 signal hardware by location and dimensions. The front stay below has a 65 mm body, while the rear option is an extended 125 mm stay. A screw-on reflector or separate lamp gasket can address a smaller restoration job.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1974 Honda CB360K0 · Signals, Stays & Reflectors Buying guide

Get signal spacing and mounting details right

Front and rear stays are separate choices, and the extended rear version should be measured against your bike. Keep reflector threads and lamp-gasket shape separate from the stay-length decision.

Parts to consider

Honda CB Front Turn Signal Stay Front signal stayChrome stay with a 65 mm body, 25 mm threaded section and 90 mm overall length.Voir la pièce Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000 Extended rear signal stayChrome 125 mm rear stay; choose this extended option by the spacing needed on your bike.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-style reflector with a 6 mm threaded mounting; reference 33741-340-670.Voir la pièce

Pièces connexes : Turn-signal lamp gasket

Measure the section that controls lamp position

The front stay has a 65 mm body and 25 mm thread, giving 90 mm overall length. The rear option is described as 125 mm and extended. Do not compare those figures without checking how the old stay was measured and where its lamp sits.

Retain sound lamps with the right small parts

The related gasket references Honda 33443-268-671 for the listed signal-lamp application. Compare the existing lens and housing before choosing it. The featured reflector uses a 6 mm screw-on mounting, so it serves a different repair from a signal lens or lamp seal.

Buying questions

Is the 125 mm rear stay the standard-length option?

It is sold as an extended-length rear stay. Measure the current mounting and desired lamp position before ordering; do not choose it solely because the application includes the CB360K0.

What does the 90 mm front-stay measurement include?

The front stay combines a 65 mm body with a 25 mm threaded section. Use the body measurement to compare the projecting stay and the overall figure to check the complete part.

Will the reflector fit a different bracket?

The reflector requires a compatible 6 mm threaded mounting. Check the thread and available clearance on an aftermarket bracket instead of assuming any reflector mounting or unthreaded hole will accept it.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB360K0

Votre panier

×