Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Solde
Honda CB750 CB550 CB500 CB400 CB360 gas cap rubber seal 17534-323-300

Honda CB Gas Cap Rubber Seal ~ Replaces 17534-323-300

$8.19 $7.95 USD
You save $0.24
20-0039
Replace your mid-'70s Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17534-323-300. Broad fitment across the SOHC CB750K, CB500/CB550...
Nouveau
Honda CB750 CB550 CB500 CB350 CB200 fuel petcock gasket 16997-273-006

Honda CB Fuel Petcock Body O-Ring / Gasket ~ Replaces 16997-273-006

$5.50 USD
49-0260
Replace your fuel petcock gasket with this Fuel Petcock Gasket / O-Ring, replacing OEM #16997-273-006 / #16960-011-000. This is the O-ring that goes between...
Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...

Honda CB Fuel Petcock Gasket ~ Replaces 16955-268-020

$7.50 USD
29-7028
Replace your fuel petcock gasket with this Fuel Petcock Gasket, replacing OEM #16955-268-020.Key Features• Fuel petcock gasket• Replaces OEM #16955-268-020• Honda part name: Gasket,...

Honda CB Fuel Petcock Screen 1969-74 ~ Replaces 16957-268-010

$5.50 USD
20-8065
Replace the fuel petcock screen in your 1969-74 CB750K stock petcock (our #20-8039) with this Replacement Fuel Petcock Screen, replacing OEM #16957-268-010.Key Features• Replacement...

Honda CB OEM Type Filler Chrome Cap ~ Replaces 17510-323-310

$49.95 USD
20-0045
Replace your OEM-type filler cap with this OEM Type Gas/Fuel Tank Chrome Cap, including gasket and hinge pin with E-clip for easy installation. Replaces...

Honda CB Gas/Fuel Tank Cap Latch Assembly

$44.95 USD
20-0083
Replace your gas cap latch with this Gas/Fuel Tank Cap Latch Assembly. Includes a chrome latch, return spring, latch mounting pin, and C-clip.Key Features•...

Honda CB Pilot Jet Set ~ Size #45 (Pk/4)

$15.95 USD
48-3105
Tune your low-speed circuit with this Pilot Jet Set of 4, size #45. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Pilot Jet Set ~ Size #42 (Pk/4)

$15.95 USD
48-3104
Tune your low-speed circuit with this Pilot Jet Set of 4, size #42. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Pilot Jet Set ~ Size #40 (Pk/4)

$15.95 USD
48-3103
Tune your low-speed circuit with this Pilot Jet Set of 4, size #40. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...

Honda CB Round Pod Air Filter

$22.95 USD
15-0030
Match the 15-0020 fitment with a chrome end-cap pod using this 39mm Round Pod Air Filter with chrome end cap. Circular style, supplied dry,...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...

Honda CB Pilot Jet Set ~ Size #38 (Pk/4)

$15.95 USD
48-3102
Tune your low-speed circuit with this Pilot Jet Set of 4, size #38. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Mounting Rubber ~ Replaces 17245-107-010

$3.50 USD
17-6942
Replace the multi-use mounting rubber on your CB with this Mounting Rubber, replacing OEM #17245-107-010. Used in multiple positions depending on the bike: headlight...

Honda CB Pilot Jet Set ~ Size #35 (Pk/4)

$15.95 USD
48-3100
Tune your low-speed circuit with this Pilot Jet Set of 4, size #35. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...

Honda CB Chrome Velocity Stack Set/4 ~ 39mm ID

$169.95 USD
73-1145
Open up your intake with this Chrome Velocity Stack Set of 4 with integrated debris screens. 39mm inner diameter, sold as a complete set...

Honda CB Round Pod Air Filter ~ Black/Red

$24.95 USD
15-0020
Fit performance pod filters on your SOHC CB with this 39mm Round Pod Air Filter with black body and red foam filter. Circular style...

Honda CB Matte Black Fuel Tank Cap with Latch ~ Replaces 17510-323-310

$69.95 USD
07-9967
Restore your classic Honda's tank with a factory-look matte-black finish using this Matte Black OEM-Type Fuel Tank Cap with Latch Assembly. A direct replacement...

Honda CB Pilot Jet Set ~ Size #48 (Pk/4)

$15.95 USD
48-3106
Tune your low-speed circuit with this Pilot Jet Set of 4, size #48. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB550/CB500/CB400/CB350 Float Bowl Gasket

$9.95 USD
20-8032
Replace your CB350F/CB400F or CL350/SL350 float bowl gasket with this Float Bowl Gasket (O-ring).Key Features• Float bowl gasket (O-ring)Fitment / Compatibility• Honda CB350F (1973‑74)...

Honda CB750 / CB550 / CB400 / CB350 Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$21.95 USD
33-0045
Replace worn or missing felt throttle shaft seals during carburetor service on compatible vintage Honda CB models with Keihin PD carburetors. These felt seals...

1972-77 Honda CB400F / CB350F Carb Holder Set ~ Replaces 16212-333-030

$89.95 USD
48-1471
Replace your CB350F or CB400F Supersport carb holders with this Carb Holder Set of 4, with O-rings to seal the manifolds to the cylinder...

Honda CB Gas/Fuel Tank Cap Latch Assembly ~ Black

$29.95 USD
01-9934
Replace a broken, missing, or worn-out fuel cap latch with this Gas/Fuel Tank Cap Latch Assembly in black. Includes the black latch, return spring,...

1972-77 Honda CB400F / CB350F Carb Air Box Rubber Boot Set ~ Replaces 17300-333-000

$64.95 USD
73-0136
Replace your CB350F or CB400F Supersport carb-to-air-box boots with this Carburetor to Air Box Rubber Boot Set of 4, replacing OEM #17300-333-000.Note: if you...

Honda CB550 / CB500 / CB400 / CB350 Float Valve ~ Replaces 16011-329-004

$13.95 USD
48-1510
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-329-004.Key Features• Float valve set (needle and seat)•...

1972-77 Honda CB400F / CB350F Stock Type Air Filter ~ Replaces 17210-333-610

$29.95 USD
15-0161
Replace your CB350F or CB400F Supersport stock air filter with this Stock-Type Air Filter, replacing OEM #17210-333-610.Key Features• Stock-type air filter• Replaces OEM #17210-333-610•...

Honda CB Foam Round Pod Air Filter

$16.95 USD
15-0095
Fit foam-media pods to your SOHC CB with this 39mm Round Foam Pod Air Filter with chrome end caps and rubber mouth. Circular style,...

1972-74 Honda CB350F Carb Rebuild Kit

$21.95 USD
48-1903
Rebuild your CB350F Supersport carb with this Carb Rebuild Kit, made in Japan. Contains float bowl gasket, O-rings, carb top gasket, float needle and...
Nouveau
Honda CB400F CB350F carburetor screw kit

1972-77 Honda CB400F / CB350F Carburetor Screw Kit

$17.57 USD
49-0775
Refresh your CB350F or CB400F Supersport carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look...

39mm Round Pod Air Filter with Black End Cap

$24.95 USD
15-0167
Replace worn or restrictive clamp-on filters with this aftermarket 39mm round pod air filter. The black end cap gives the filter a darker custom...

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...

Honda CB Secondary Main Jet #68 with O-Ring ~ Replaces 99202-601-0680

$5.95 USD
48-1586
Replace a worn, damaged, or incorrect secondary main jet on compatible Honda CB Keihin carburetors with this aftermarket Keihin-type press-fit main jet in size...

Honda CB Joker Machine Black Gas Tank Cap Latch Assembly

$79.95 USD
73-1157
Upgrade your fuel tank latch with the Joker Machine Custom Black Gas/Fuel Tank Cap Latch Assembly. Designed as a premium alternative to the discontinued...

Honda CB Joker Machine Billet Black Flip-Up Gas Cap

$149.95 USD
73-1156
Joker Machine’s Custom Black Flip-Up Billet Gas Cap is a beautifully crafted upgrade to your original tank cap. CNC-machined from solid 1" thick billet...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...

1972-74 Honda CB350F Carb Bolt Kit

$23.95 USD
73-1046
Restore your carburetor hardware with this Carburetor Bolt and Washer 40-Piece Kit, a complete bolt kit for all 4 carburetors.Key Features• Carburetor bolt and...

1972/1974 Honda CB350F Throttle Cable ~ Push ~ Replaces 17920-333-000

$21.15 USD
51-3537
Replace your CB350F Supersport throttle push cable with this Throttle Cable "B" Push Type, replacing OEM #17920-333-000.Key Features• Throttle cable "B", push type• Replaces...

1972/1974/1977 Honda CB400F / CB350F Throttle Cable ~ Pull ~ Replaces 17910-333-000

$21.15 USD
51-3535
Replace your CB350F or CB400F Supersport throttle pull cable with this Throttle Cable "A" Pull Type, replacing OEM #17910-333-000.Key Features• Throttle cable "A", pull...

1974 Honda CB350F1 · Fuel System Parts Buying guide

Plan around the original four-carb arrangement

Honda’s final catalog lists the same carburetor assembly for F and F1. That is useful application evidence, but a changed carburetor bank, air box or tank must be matched as installed.

Keep the stock baseline clear

The original carburetors use mechanically operated slides. Honda lists a #75 main jet and #35 slow jet as standard, with optional sizes separately identified. Inspect what is fitted before planning a stock restoration or tuning work; the year alone does not reveal previous jet changes.

Check the intake before adding carburetor parts

The stock-type element belongs in the original air-cleaner arrangement. The four-holder set seals the engine side of the carburetors and includes its manifold O-rings. Identify damaged rubber, missing components and any intake conversion before building an order around a carburetor kit alone.

Ordering questions

How many rebuild kits cover the original carburetor bank?

Each kit services one carburetor, so a complete four-carb rebuild needs four kits when those contents are required at every position. Check floats and other separately sold components independently.

Are these original carburetors vacuum-slide CV units?

No. The CB350F/F1 factory arrangement has mechanically operated slides. Identify the actual carburetors if they have been replaced before choosing model-specific internal parts.

Does changing to pod filters establish the correct jet size?

No. A changed intake or exhaust requires assessment of the actual engine and carburetor setup. Honda’s stock #75 main and #35 slow jet baseline is not an automatic specification for a modified bike.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×