VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB350F1 Supersport — pièces de moto

Keeping the F1’s mechanical instruments working requires the correct cable for each gauge. A tach-drive blanking plug serves a different purpose when the cable drive is removed. Decide which arrangement you intend to retain, then compare ends, routing and drive fittings.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB400 CB350 tach drive plug block off w o-ring

Honda CB Tach Drive Plug Block Off w O-Ring

$22.95 USD
73-0884
Block off your tach drive cleanly with this Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable...
Honda CB750 CB550 CB500 CB450 CB400 speedometer cable 44830-425-870

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...
Honda CB1000 CB900 CB750 CB650 speedo gear plug

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...
Honda CB750 CB650 CB550 tach drive plug block off black joker machine

Honda CB Tach Drive Plug Block Off ~ Black ~ Joker Machine

$39.95 USD
73-1075
Block off your tach drive cleanly with this Joker Machine Brand Black Tach Drive Plug (Block Off). This plug is generally used when the...
Honda CB400F CB350F CB200TK tachometer cable 37260-333-000

1972-77 Honda CB400F / CB350F / CB200TK Tachometer Cable ~ Replaces 37260-333-000

$23.45 USD
73-0197
Replace your CB350F, CB400F, or CB200T tachometer cable with this Tachometer Cable, replacing OEM #37260-333-000. Made in Japan.Key Features• Tachometer cable• Replaces OEM #37260-333-000•...
Comparer

1974 Honda CB350F1 · Instrument Cables Buying guide

Retain the mechanical drive or deliberately blank it off

The tachometer cable matches Honda’s F1 reference. The speedometer replacement has a stated overall length, while the blanking plug is a conversion component rather than a cable repair.

Parts to consider

1972-77 Honda CB400F / CB350F / CB200TK Tachometer Cable ~ Replaces 37260-333-000 Tachometer cableJapanese-made cable replacing 37260-333-000, with explicit 1974 CB350F application.Voir la pièce Honda CB Speedometer Cable ~ Replaces 44830-425-870 Black speedometer cable38.5 inches end to end, made in Japan. Compare its routing and end fittings with the installed instruments.Voir la pièce Honda CB Tach Drive Plug Block Off w O-Ring Tach-drive blanking plugSupplied with an O-ring; for removing the mechanical cable drive, with approximately 15 mm cable-end diameter and 10.5 mm groove.Voir la pièce

Compare complete cable routes

The tachometer cable replaces 37260-333-000 and is made in Japan. The featured speedometer cable is black and measures 38.5 inches end to end. Check the route between drive and gauge, especially where changed bars or instrument mounts alter the required reach.

Distinguish a plug from a working drive

The tach-drive blanking plug is supplied with an O-ring and is specified for an approximately 15 mm cable end with a 10.5 mm groove held by a screw. Compare the actual connection before choosing it for a conversion; it does not transmit drive to a mechanical tachometer.

Common buying questions

Which cable corresponds to the F1 tachometer reference?

The featured tachometer cable replaces 37260-333-000, the reference in Honda’s F1 instrument listing. Compare its end fittings with the installed drive and gauge before fitting it.

Will the speedometer cable suit relocated gauges?

Check the full intended route against its 38.5-inch end-to-end length and compare both ends. Relocated instruments or changed bars can alter the required reach even on an otherwise original motorcycle.

What connection does the tach-drive plug require?

The plug is specified for an approximately 15 mm cable end with a 10.5 mm groove, retained by a screw. An O-ring is supplied. Compare the fitted connection before buying it for a cable-removal conversion.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB350F1

Votre panier

×