VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CL450K3 Scrambler — pièces de moto

Check the ignition equipment fitted to your 1970 Honda CL450K3 before choosing replacement parts. The switch has a round six-hole, four-wire connector, while the coil has its own mounting and lead details. Left and right contact points must also be identified separately.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Allumage, contacteurs, bobines, bougies et rupteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB450 CB350 CB175 CL350K0 ignition switch 35100-303-007

Honda CB Ignition Switch ~ Replaces 35100-303-007

$34.95 USD
12-0060
Fit the round-plug ignition switch on your early classic Honda with this Ignition Switch (round plug, 6-hole 4-wire type), replacing OEM #35100-303-007 / #35100-292-003...
Honda CB500 CB450 CB350 CL350K0 CL350K1 ignition coil 30500-292-672

Honda CB Ignition Coil ~ Replaces 30500-292-672

$37.95 USD
17-6923
Replace your CB450/CL450, CB500T, or CB350/CL350/SL350 ignition coil with this Ignition Coil, replacing OEM #30500-292-672 / #30500-312-000 / #30500-286-004 / #30500-286-007 / #30500-310-670. 12V...
Honda CB500 CB450 CB360 CB350 CL350K0 condenser 30250-369-004

Honda CB Condenser ~ Replaces 30250-369-004

$21.95 USD
26-5106
Replace your condenser with this Condenser, replacing OEM #30250-369-004 / #30280-292-672 / #30280-292-671.Key Features• Condenser• Replaces OEM #30250-369-004 / #30280-292-672 / #30280-292-671• Honda part...
Nouveau
Honda CB500 CB450 CL450K0 contact point right side 30203-292-003

Honda CB Contact Point ~ Right Side ~ Replaces 30203-292-003

$14.95 USD
14-0007
Replace the right-side contact point on your CB500T or CB450/CL450 with this Contact Point for the Right Side, replacing OEM #30203-292-003 / #30203-292-154.Key Features•...
Nouveau
Honda CB500 CB450 CB160 CL450K0 contact point left side 30204-292-003

Honda CB Contact Point ~ Left Side ~ Replaces 30204-292-003

$14.95 USD
14-0008
Match with the left-side contact point using this Contact Point for the Left Side, replacing OEM #30204-292-003 / #30204-292-154. Same fitment as 14-0007 plus...
Comparer

1970 Honda CL450K3 · Ignition Parts Buying guide

Match the connector, coil mount and point side

An ignition order can involve a switch, coil, condenser or individual contact point. Identify the component being replaced and record its connections and mounting details so that a broad parts search becomes a specific comparison.

Parts to consider

Honda CB Ignition Switch ~ Replaces 35100-303-007 Round-plug ignition switchRound six-hole, four-wire plug. Compare the connector and wire positions with the fitted harness.Voir la pièce Honda CB Ignition Coil ~ Replaces 30500-292-672 Single-output ignition coil12 V, 5-ohm coil with attached leads and approximately 80 mm mounting centers; sold each.Voir la pièce Honda CB Condenser ~ Replaces 30250-369-004 Ignition condenserReplacement references include 30250-369-004, 30280-292-672 and 30280-292-671.Voir la pièce

Pièces connexes : Left contact point · Right contact point

Allow for the coil’s wire exits

The 12 V single-output coil is described with 5-ohm primary resistance, approximately 80 mm mounting centers and a 19-inch spark-plug wire. Its instructions also note a different mounting orientation when replacing a beige Honda coil. Review that detail against the actual fitted part before installation.

Keep the contact-point sides distinct

The linked left point references 30204-292-003 and 30204-292-154; the right point references 30203-292-003 and 30203-292-154. Choose by the side being serviced. Establish the appropriate adjustment and timing procedure from the engine’s service information rather than copying another model’s settings.

Buying questions

Is the replacement ignition coil supplied as a pair?

It is sold each and comes with wires attached. Inspect the ignition system and determine how many individual coils need replacement before ordering; a single product line does not describe a paired kit.

What should I compare if the wiring harness has been replaced?

Check the round connector’s shape, six holes, four occupied wire positions and the required connections. A replacement loom can change what is needed, so confirm the actual switch-to-harness match before ordering.

How do the left and right contact points differ in the catalog?

Their reference families identify the side: 30204-292-003 or -154 for the left point, and 30203-292-003 or -154 for the right. Match the installed position before choosing either linked part.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CL450K3

Votre panier

×