VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CL450K3 Scrambler — pièces de moto

Start a 1970 Honda CL450K3 brake or clutch order at the worn connection. Lever pivots, brake-rod joints and internal clutch parts require different checks. Compare the controls actually fitted, especially where an earlier owner has changed a perch, lever or brake assembly.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB500 clutch tab washer 90431-292-000

Honda CB Clutch Tab Washer ~ Replaces 90431-292-000

$7.50 USD
73-0839
Replace your clutch tab washer with this Clutch Washer, 16mm size, replacing OEM #90431-292-000.Key Features• Clutch tab washer• 16mm size• Replaces OEM #90431-292-000• Honda...
Honda CB750 CB550 CB450 CB400F clutch lever 53178-369-700

Honda CB Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0006
Replace a worn silver-with-black-tip clutch lever with this Clutch Lever, a direct replacement for OEM #53178-369-700. Exceptionally broad fitment across the classic Honda lineup,...
Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB700 CB500 CB450 CL450K0 steel clutch plate 22321-MG8-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000

$11.95 USD
39-1409
Replace your SOHC CB750, CB700SC Nighthawk, CB500T, or CB450/CL450 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MG8-000 / #22321-283-000.Order the...
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Épuisé
Honda CB750 CB550 CB450 gp-style clutch lever 53178-369-700

Honda CB GP-Style Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0080
Bring racetrack-inspired ergonomics to your cockpit with this Custom GP-Style Clutch Lever in silver. Features a more pronounced bend/kickback than the stock lever, for...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Honda CB125S CB175 CB350 CB450 hand lever 53175-402-700

Honda CB Hand Lever ~ Replaces 53175-402-700

$9.95 USD
08-0066
Fit a silver-with-black-tip brake lever on your small-bore Honda with this Brake Lever, replacing a range of OEMs (#53175-402-700, #53170-216-670, #53175-286-000, #53170-286-670, #53170-329-010, #53170-369-700,...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Épuisé
Honda CB400 CB450 CB350 CB125S black hand lever 53175-467-000

Honda CB Black Hand Lever ~ Replaces 53175-467-000

$9.95 USD
08-0084
Replace a black-finish brake lever on your small-bore classic with this Brake Lever, replacing a range of OEMs (#53175-467-000, #53170-413-670, #53175-402-700, #53175-360-700, #53175-399-700). Fits...
Comparer

1970 Honda CL450K3 · Brake & Clutch Parts Buying guide

Order for the worn connection first

Inspect the lever, its pivot hardware and the brake-rod connection as separate parts of the repair. Appearance alone cannot establish whether a control component will work with the assembly currently on the motorcycle.

Parts to consider

Honda CB Clutch Lever ~ Replaces 53178-369-700 Silver clutch leverSilver lever with a black rubber tip, replacing reference 53178-369-700.Voir la pièce Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000 Clutch lever pivot setContains one pivot bolt and one nut for the clutch lever.Voir la pièce Honda CB Brake Rod Joint Pin with Cotter Pin Brake rod joint pin setJoint pin supplied with a cotter pin, referenced to 95015-52000 and 94201-16250.Voir la pièce

Pièces connexes : Brake rod joint · Brake rod adjusting nut

Match both halves of a control repair

The silver clutch lever has a black rubber tip; its separate pivot set contains one bolt and one nut. Inspect the existing lever and perch before deciding whether the lever alone is the part required. Match the fastening arrangement instead of choosing solely by finish.

Keep rod fittings distinct

The linked brake rod joint and adjusting nut are separate from the featured joint-pin set. The joint-pin item includes a cotter pin. Identify which connection needs attention and compare the installed pieces before building the order, rather than treating one small fitting as a complete linkage repair.

Buying questions

What should I compare before reusing the lever with new pivot hardware?

Compare the existing lever, perch and pivot attachment before reusing those parts. The replacement pivot set contains one bolt and one nut; inspect the mating components as well before deciding that fasteners alone cover the repair.

Which brake-rod part includes the cotter pin?

The brake rod joint-pin product includes a cotter pin. The joint and adjusting nut are separate choices, so identify the connection being serviced before adding parts to the repair list.

Can a universal hydraulic control be treated as a stock replacement?

A universal label does not establish the required application. Identify the brake assembly already fitted and verify its compatibility before considering any universal hydraulic control or assembly-specific replacement lever.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CL450K3

Votre panier

×