VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1967 Honda CL450K0 Scrambler — pièces de moto

Rear shock work on a 1967 Honda CL450K0 may involve only the mounting rubbers or a replacement shock set. Decide which job you are doing first. Compare mounting style and measured length before considering the stock-design set or any custom alternative.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB500 CB550 CB450 CB350 stock design shock absorber set 321mm 52400-455-670XW

Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3642
Restore factory-look rear suspension with this Stock-Design Shock Absorber Set, modelled after the original OEM shocks on a range of CB500, CB550, CB450/CL450, and...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1967 Honda CL450K0 · Shock Mounts & Replacements Buying guide

Choose mounting service before changing shock geometry

The featured joint rubbers are supplied as two pieces. The linked chrome shock set and replica washers are separate choices, each with its own dimensions or usage information for planning an order.

Parts to consider

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubber setTwo shock absorber joint rubbers referenced to 52484-292-000.Voir la pièce

Pièces connexes : 321mm chrome stock-design shocks · OEM-type shock mounting washer

Compare the stock-design set with the fitted mounts

The related chrome stock-design shock set explicitly covers the 1967 CL450. It measures 321mm from eye center to clevis and offers five-position spring preload adjustment. Compare the installed mounts and clearance before ordering, particularly if the swingarm or shock attachments have been altered.

Plan mounting rubber and washer quantities separately

The joint rubber product supplies two rubbers. The linked OEM-type replica washer carries a two-used-per-bike note, which describes usage rather than explicitly defining a two-washer pack. Check the package quantity before finalizing that separate washer order and inspect the hardware already on the bike.

Buying questions

Is the 321mm measurement between two eyes?

No. The linked stock-design shock is measured from the center of its eye to the clevis. An eye-to-eye measurement describes a different mounting arrangement, so identify both ends before comparing advertised lengths.

Will the rubber set suit any aftermarket shock?

The set contains two rubbers with reference 52484-292-000. Compare the joint design on the fitted shock; the motorcycle application does not establish compatibility with every aftermarket eye, sleeve or mounting arrangement.

What adjustment does the chrome replacement set provide?

The related set offers five spring-preload positions. Choose it with the stated 321mm eye-to-clevis configuration in mind; preload adjustment does not change the mounting style or make a 290mm custom shock an equivalent replacement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1967 Honda CL450K0

Votre panier

×