VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB450SC Nighthawk — Compte-tours et compteurs de vitesse

Before buying mounting or wiring parts for a 1986 Nighthawk speedometer conversion, obtain the complete fitting specification. These gauges publish housing measurements and mounting-center spacing. Supplied bracket contents, connected rear clearance and the electrical information needed for LED lighting still require confirmation.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Compte-tours et compteurs de vitesse

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB custom vintage style mph speedometer front view

Custom Vintage Style Speedometer MPH

$99.95 USD
03-0760
Custom Vintage Style Speedo (MPH) - Mechanical speedometer ratio: 2240:60. Before ordering, confirm the drive ratio, cable or electrical connection, gauge diameter, and mounting...
Voir les détails
Honda CB custom vintage style kph speedometer front view

Custom Vintage Style Speedometer KPH

$99.95 USD
03-0761
Custom Vintage Style Speedo (KPH) - Mechanical speedometer 60 km/h = 1400 rpm Before ordering, confirm the drive ratio, cable or electrical connection, gauge...
Voir les détails
Comparer

1986 Honda CB450SC Nighthawk · Speedometers Buying guide

Translate gauge dimensions into a complete fitting plan

Each gauge is approximately 85mm in diameter and 55mm deep, with mounting centers 57mm apart and LED illumination. Use those measurements to assess the proposed location. They do not specify an included bracket package or the total space needed once the cable and mounting parts are connected.

Parts to consider

Custom Vintage Style Speedometer MPH MPH instrument for a custom bracket assessmentApproximately 85mm diameter and 55mm housing depth, with 57mm mounting-center spacing. LED illumination and 2240:60 mechanical calibration require their own wiring and drive checks alongside the mount.Voir la pièce Custom Vintage Style Speedometer KPH KPH instrument for a custom bracket assessmentThe same approximate housing dimensions and mounting spacing, with LED illumination. Match its 60 km/h at 1,400 cable rpm calibration and confirm the complete connected assembly before ordering fitting parts.Voir la pièce

Confirm supplied fittings before ordering a bracket

The mounting-center measurement describes where the gauge attaches; it does not itemize the hardware supplied. Request that information for the selected instrument before choosing additional mounting pieces. This model is listed with custom mounting required, so plan the bracket around the actual installation space.

Request connected clearance and lighting information separately

Ask for the rear space needed with the cable and mount attached, rather than treating housing depth as total installed depth. Obtain LED operating voltage and wire assignments as a separate specification. Neither the complete rear-clearance figure nor those electrical details is stated.

Ordering questions

Should I add a separate bracket to the speedometer order?

First ask which mounting pieces accompany the chosen gauge. The listing states 57mm mounting centers but does not itemize a bracket package. Use confirmed contents and the available mounting location to decide which additional fittings the custom installation needs.

What information is needed before ordering connectors for the LED lighting?

Obtain the illumination operating voltage and the assignment of each wire. LED lighting is specified, but those electrical details are absent. Choose connectors and plan the wiring only after the requirements for the selected gauge have been confirmed.

What clearance should I request for a tightly spaced instrument location?

Request dimensions with the proposed cable connection and mounting parts attached. The approximate 55mm figure describes housing depth, without establishing total rear space. Confirm the complete assembly clearance before using the available room to finalize the mount or cable arrangement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB450SC Nighthawk

Votre panier

×