VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB450SC Nighthawk — Jantes, rayons, joints de roue et valves

The wheel-service choices for the 1984 Honda CB450SC Nighthawk identify two different positions: a 6302-2RS front bearing and a dimensioned rear-wheel seal. The bearing is sold individually, although two are used at the front. Keep those purchase quantities and service locations separate when preparing an order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Honda CB450SC rear wheel seal 28 x 47.2 x 7

1982-86 Honda CB450SC Rear Wheel Seal ~ 28 x 47.2 x 7

$4.61 USD
27-9111
Replace your CB450SC Nighthawk rear wheel seal with this Rear Wheel Seal, 1 piece, 28 x 47.2 x 7mm. Made in Japan by OEM...
Comparer

1984 Honda CB450SC Nighthawk · Front Bearing and Rear Seal Buying guide

Write the wheel position alongside each bearing or seal

The Japanese 6302-2RS bearing has two synthetic seals and is an individual purchase. The rear-wheel seal is a separate Japanese OEM-supplier piece measuring 28 x 47.2 x 7 mm. Its application covers the CB450SC for 1982–86; it is not described as a front-wheel seal.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing 6302-2RS bearing sold individuallyTwo used in the compatible front wheel; each Japanese bearing has two synthetic seals.Voir la pièce 1982-86 Honda CB450SC Rear Wheel Seal ~ 28 x 47.2 x 7 Single rear-wheel sealOne 28 x 47.2 x 7 mm seal for the stated CB450SC rear-wheel application, made in Japan by an OEM supplier.Voir la pièce

Distinguish bearing construction from the order quantity

The two synthetic seals describe the construction of one 6302-2RS bearing. The separate quantity statement calls for two bearings at the front, each sold individually. Keep both statements in the order notes so a sealed bearing is not mistaken for a two-bearing package.

Use donor-wheel information when the original hub is gone

The original motorcycle application supports the listed front bearing and rear seal. A wheel transplanted from another model needs its own hub requirements checked. Carry the donor identity, bearing reference and seal dimensions into that decision before assuming the original CB450SC quantities and sizes remain applicable.

Common questions

Does the bearing’s two-seal construction change how many bearings I should buy?

Two synthetic seals belong to each individual 6302-2RS bearing. The listing separately specifies two bearings for the front wheel, sold one at a time. Buy the required individual bearing quantity; the two-seal description does not describe a two-bearing package.

What information matters when the fitted wheels came from a donor motorcycle?

Identify the donor hubs, then confirm their required bearing reference and seal dimensions. These listings establish the original front 6302-2RS application and a 28 x 47.2 x 7 mm rear seal; neither confirms an unidentified replacement hub from the frame’s model.

Which size and supply quantity should I use for the rear-wheel seal order?

The rear seal is one 28 x 47.2 x 7 mm piece for a compatible CB450SC, with written 1982–86 coverage. Use that complete specification and single-piece supply when planning rear-hub service, rather than extending the front-bearing quantity to the seal.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB450SC Nighthawk

Votre panier

×