VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB450SC Nighthawk — Alimentation en carburant

For a 1984 Honda CB450SC Nighthawk carburetor order, separate a rebuild kit from the intake joint and bowl-drain parts being serviced. The later kit covers one carburetor per package. Holder assemblies and drain screws also have individual supply counts, while the two-gauge synchronizer requires its own connection comparison.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 float bowl gasket

Honda CB1100/CB1000/CB900/CB750 Float Bowl Gasket

$9.50 USD
20-8031
Replace your DOHC CB float bowl gasket with this Float Bowl Gasket (O-ring). Broad fitment across the 1979-82 CB750 family, CB750SC Nighthawk, CB900/CB1000/CB1100, CB650...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Honda CB450 CB400 carb holder with o-ring 16211-447-670

1980-86 Honda CB450 / CB400 Carb Holder with O-Ring ~ Replaces 16211-447-670

$24.95 USD
33-0017
Ensure a secure and reliable connection between the carburetor and intake with this Carb Holder with O-Ring, designed as a direct replacement for the...
Nouveau
Honda CB450SC carb rebuild kit

1983-86 Honda CB450SC Carb Rebuild Kit

$17.95 USD
48-1397
Rebuild your CB450SC Nighthawk carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit•...
Comparer

1984 Honda CB450SC Nighthawk · Fuel System Buying guide

Count the serviced positions and confirm the carburetors actually fitted

The later kit lists 1983–86 CB450SC models and specifies two kits for the complete system. One holder comes with one O-ring, with two holders used on the listed twins. The selected drain screw includes its O-ring. The synchronizer’s supplied extensions have 5 mm threads; universal coverage does not confirm every vacuum connection.

Parts to consider

1983-86 Honda CB450SC Carb Rebuild Kit Later Nighthawk kit for one carburetorOne kit services one carb; two kits cover the listed complete 1983–86 CB450SC system.Voir la pièce 1980-86 Honda CB450 / CB400 Carb Holder with O-Ring ~ Replaces 16211-447-670 Individual intake holder and O-ringOne holder includes one O-ring; two assemblies replace both listed intake connections.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw ~-A Drain screw supplied with its O-ringSold individually, with screw and seal comparison required at the fitted carburetor.Voir la pièce

Pièces connexes : Individually sold bowl-joint gasket · Two-gauge tool with 5 mm threaded extensions

Confirm package contents at the level the listing actually states

The rebuild kit establishes one-carb coverage and later-model application but does not enumerate every supplied component or jet size. The holder and drain screw each expressly include an O-ring. Keep those clear package facts separate from any unverified assumption about the rebuild kit’s detailed contents.

Assess the intake joint before planning synchronization work

The holder FAQ warns that cracking, hardening or poor sealing can create an intake leak and interfere with synchronization. Inspect both holders rather than tuning around a leak. For the universal tool, compare the actual vacuum connections with its supplied hoses and 5 mm threaded extensions before purchasing.

Ordering questions

How many later rebuild kits cover one carburetor compared with the complete system?

The 1983–86 CB450SC kit services one carburetor per package. Its FAQ specifies two kits for the complete system. Decide which carburetors are being rebuilt and confirm the fitted carburetor identification before using that stated package coverage for the order.

Does replacing both intake holders require a separate order for their O-rings?

Each holder assembly includes one O-ring, and two assemblies replace both intake connections on the listed CB450 models. The holder references are 16211-447-670 and 16211-413-750; the included seal replaces 91325-413-830. Count assemblies without duplicating their supplied seals.

What connection information should I check before buying the two-gauge synchronizer?

The supplied 180 mm and 65 mm extensions use 5 mm threads; hoses and dampening valves are included. Compare those connections with the carburetors fitted to the motorcycle. The listing describes universal/custom use and does not confirm every replacement carburetor’s vacuum-port interface.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB450SC Nighthawk

Votre panier

×