VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB450SC Nighthawk — Outils pour carburateur

Prepare the measuring setup before buying a synchronizer for your 1983 CB450SC Nighthawk. This kit provides two vacuum gauges with connection equipment and dampening valves. Confirm the fitted carburetor ports and available extension access so the universal/custom kit can be assessed against the actual motorcycle.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Comparer

1983 Honda CB450SC Nighthawk · Carburetor Tools Buying guide

Plan the two connections and the equipment between them

The kit compares two carburetors at a time. Its included bracket, hoses and valve equipment support that comparison, while 5mm-thread extensions in 180mm and 65mm lengths provide specific connection details to check.

Parts to consider

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer Vacuum comparison equipment for two carburetorsTwo gauges supplied with a mountable bracket, hoses, dampening valves, instructions and 180mm/65mm extensions; both extension sizes use 5mm threads.Voir la pièce

Verify the port thread rather than a broad application

The product identifies universal/custom use for two-carburetor setups and describes Honda connections as typically 5mm. Check the ports actually fitted to the motorcycle, including replacement carburetors, before relying on those adapters. Arrange compatible connection equipment separately if the required thread differs from the extensions supplied.

Account for the supplied damping equipment

The included dampening valves steady the vacuum pulses that move the gauge needles. Plan the bracket and hoses where readings can be observed, following the kit instructions. Obtain the applicable carburetor service information for balance requirements rather than treating the gauge kit as a source of model-specific adjustment settings.

Vacuum Gauge Kit Preparation questions

How many vacuum connections can this kit compare simultaneously?

Its two gauges connect to two carburetors at the same time, allowing their intake vacuum to be compared. Confirm the fitted connections and adapter requirements as part of that setup; the kit is described for universal/custom two-carburetor applications.

What should I check before relying on the supplied connection adapters?

Check the required port thread against the included 5mm threads, then compare access with the 180mm and 65mm extensions. A typical Honda connection size is useful guidance, but replacement carburetors still need their own connection check.

Do I need to add needle-damping equipment to the kit order?

The kit already includes dampening valves, which steady vacuum pulses for easier needle comparison. It also supplies the gauges, bracket, hoses, extensions and instructions. Additional connection equipment depends on the actual port requirements rather than the damping function.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB450SC Nighthawk

Votre panier

×