VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB450SC Nighthawk — Suspension et roues

For the 1983 CB450SC Nighthawk, separate maintenance of the original fork and wheels from selection of universal shorty shocks. The seal and bearing listings give clear sizes or counts. A custom shock order needs the fitted mounts and clearance checked before its 290 mm length or finish becomes the deciding factor.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB750 CB550 CB500 CB450 CB400 fork cap o-ring (set 2) 94608-50000

Honda CB Fork Cap O-Ring (Set/2)

$2.95 USD
49-0790
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #94608-50000 (qty 2).Key Features• Fork cap O-rings• Set of...
Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit (2)

Honda CB Steering Bearing Kit (2)

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit

Honda CB Steering Bearing Kit

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB450 CB400 CB360 fork seals

Honda CB450 / CB400 / CB360 Fork Seals

$21.95 USD
27-1019
Replace your CB400 or CB360 fork seals with this Fork Seal Set, 33 x 46 x 11mm. Made in Japan by OEM supplier.Key Features•...
Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD
73-0189
Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB450 CB400 CB350 CB200 swingarm dust seal cap 52144-356-005

Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005

$24.95 USD
99-5170
This genuine Honda swingarm dust seal cap fits at the swingarm pivot / rear fork area on select Honda CB models. It helps cover...
Honda CB450SC rear wheel seal 28 x 47.2 x 7

1982-86 Honda CB450SC Rear Wheel Seal ~ 28 x 47.2 x 7

$4.61 USD
27-9111
Replace your CB450SC Nighthawk rear wheel seal with this Rear Wheel Seal, 1 piece, 28 x 47.2 x 7mm. Made in Japan by OEM...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1983 Honda CB450SC Nighthawk · Suspension & Wheel Buying guide

Settle custom mounts before combining service parts

The chrome shorty shocks use an upper eye and lower clevis. Fork seals measure 33 × 46 × 11 mm, while front 6302-2RS bearings are individually supplied with two specified per front wheel.

Parts to consider

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm Chrome custom eye-to-clevis shocksTwo 290 mm custom shocks with 12 mm ID × 21 mm upper bushings; verify lower mounts, travel and clearance.Voir la pièce Honda CB450 / CB400 / CB360 Fork Seals Two dimensioned fork oil sealsA two-seal package, 33 × 46 × 11 mm, made in Japan by an OEM supplier for the listed compatible forks.Voir la pièce Honda CB 6302-2RS Front Wheel Bearing 6302-2RS front bearing, sold eachOne Japan-made bearing per order; two bearings are required for the compatible front wheel.Voir la pièce

Pièces connexes : 28 × 47.2 × 7 mm rear-wheel seal · Tapered steering-bearing conversion · Two fork-cap O-rings, reference 94608-50000

Use the mounting arrangement as the first shock decision

The shorty listings distinguish eye-to-clevis and eye-to-eye products. They are universal custom shocks, so matching the motorcycle name cannot settle the lower mount. Compare the fitted joints, bushing sizes, mounting widths and clearance before choosing a finish or planning a height change.

Build wheel and fork quantities from separate listings

The front bearing is sold individually, with two required at the front wheel. The fork package includes two oil seals, and the rear-wheel seal includes one piece. Those units belong to different assembly locations and should be entered separately when combining maintenance orders.

Common questions

What must be confirmed before choosing the chrome 290 mm shock pair?

Confirm a compatible upper eye and lower clevis arrangement, including mount size and width. The source also requires checks of travel, tire-to-fender, chain, exhaust and stand clearance. Its short custom length does not promise original-height fit on this motorcycle.

Does the two-seal bearing description mean two front bearings arrive?

The 6302-2RS bearing’s two synthetic seals describe one bearing. Each bearing is sold individually, with two required per compatible front wheel. Use an order quantity of two if both front bearing positions are being renewed.

Which separate seal sizes should I record for fork and rear-wheel work?

Record 33 × 46 × 11 mm for the two-piece fork oil-seal package. The rear-wheel seal is separately supplied as one 28 × 47.2 × 7 mm piece. Match each dimension to its own fitted assembly, particularly when forks or wheels have been changed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB450SC Nighthawk

Votre panier

×