VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB450SC Nighthawk — Pignons et couronnes

Compare the front sprocket fitted to your 1982 CB450SC Nighthawk before choosing the listed 17-tooth replacement. Tooth count affects the gearing choice, and the chain, splines, offset and retaining arrangement must also match. The lock plate and its two bolts are a separate hardware set.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pignons et couronnes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Honda CB750 CB450 CB400 CB350 CL450K0 steel front sprocket 17 tooth

Honda CB Steel Front Sprocket ~ 17 Tooth

$23.45 USD
99-4817
Front sprocket designed for a range of Honda models. A critical drivetrain component, it transfers power from the engine to the chain, making proper...
Comparer

1982 Honda CB450SC Nighthawk · Front Sprockets Buying guide

Use the installed drive to assess the 17-tooth option

The sprocket is sold individually and is identified as a 17-tooth front replacement. The retaining set supplies one plate and two bolts. Check the current gearing and the condition of the complete final drive rather than treating a new front sprocket as the only purchasing decision.

Parts to consider

Honda CB Steel Front Sprocket ~ 17 Tooth 17-tooth steel front sprocketIndividually sold front sprocket with a stated 1982 CB450SC application. Verify the existing tooth count, chain specification, splines, offset and retaining arrangement before ordering.Voir la pièce Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000 Front lock plate with two boltsOne plate replaces 23811-292-000, with two bolts replacing 92101-06016-0A. The package supplies the retaining hardware for one compatible front sprocket.Voir la pièce

Consider the current front and rear tooth counts

The sprocket information explains that a larger front tooth count generally lowers engine rpm at the same road speed while reducing mechanical leverage. The actual change depends on both existing sprockets. Establish the present gearing before deciding whether 17 teeth is the replacement you want.

Include worn retaining and drive pieces in the plan

The lock-plate information calls for replacing a bent, cracked or worn plate. The sprocket information also directs attention to hooked rear teeth, tight chain links and excessive stretch. Inspect these pieces together so remaining wear does not undermine the new front sprocket.

Front Sprockets buying questions

What should I compare if I want to keep the existing gearing?

Count the fitted front teeth and record the rear tooth count before selecting the 17-tooth replacement. Confirm chain pitch, spline profile, offset, retaining method and chain length as well; model application alone does not establish the current drive setup.

When should I add the lock-plate set to the sprocket order?

Inspect the existing plate for bending, cracks, worn bolt holes or insecure locking. The separate set provides one 23811-292-000 plate and two 92101-06016-0A bolts for one front sprocket. Renew damaged retaining hardware when planning the replacement.

Which remaining drive wear should affect the parts I order?

Inspect the chain and rear sprocket together. Hooked teeth, tight links or excessive chain stretch can quickly wear a new front sprocket. The product information recommends renewing worn components together, then following Honda specifications for slack and alignment.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB450SC Nighthawk

Votre panier

×